Top 10 ExpressLRS • ELRS • Tips and Tricks on EdgeTX

This video will explain some of the things you'll want to understand if you plan on using ExpressLRS on an EdgeTX based radio. Only standard ELRS telemetry sensors are used in the video, so make sure you discover new sensors before trying to setup your radio based on what you see in the video.

RCVR CHANNEL LINKS

AFFILIATE LINKS

#RCVideoReviews #EdgeTX #ExpressLRS #ELRS

[Retset]

You'll read in another comment that I have just started converting my nice aircraft to ELRS. This video proved hugely valuable. I especially appreciated the receiver number and packet rates hints, the latter being doubly important as LBT firmware restricts the TX to 100mw.

[TeezoDouble]

Got my first elrs tx and rx today. Perfect timing to start this new journey. Thank you

[sunsetpark_fpv]

Once again, I dub your video as the ELRS HOLY GRAIL. Thank you for these tips. Very insightful and helpful. 🤩😎

[MrBumbles]

once again you help me lol. short n sweet but no one else is explaining this stuff. and finding time to read all night just doesnt exist. lol

[MrZeek]

Wow you have been busy amazing stuff John . Glad you are taking all the guessing out of how to set up ELRS and making it easier thank you
Take Care

[FixedWing]

Great tips thanks and very well presented thanks.

[MrFalcon]

Another mystery solved! Was wondering why the receiver ID number setting. Makes complete sense now. Thanks again for another concise and informative video, John!

[williamcox]

Thanks for these tips. It will make it easier to set up things. Keep up the good work John.

[ZeroHourPrep]

Great video John, Elrs is coming along very nicely! It is a very exciting time to be in our hobby!! Take care

[GiorgioCanepaMBG]

Hi RC Video Reviews, with the compliments for these tutorials which, of course, I have bookmarked and, unless you advise otherwise, would also use for my drone in order to be able to switch the RSSI so as to distance myself from noise and have a better link automatically. One thing, having the Radiomaster Boxer and therefore a black and white display, in Logical switches page 9/12 how can I set V1 ? to 1RSSI and then V2 ? also to -95 ? Thank you.

[rodrigoc]

Great tips, easy to understand and very simplified, amazing contribution Thanks a lot!

[SBWings]

Love the tips! Hate the slamming sound effect! 😄

[MichaelRogersJesusrules]

Awesoome, subed liked, thank you for sharing.!

[_Brando_]

Got my module right after my only quad died. Damn mipi cable was pinched from factory. Gave out when i landed yesterday. Just waitin on the mail man lol

[paolo]

great video finally so clear and simple john can you do something similar for the famous aux 1 or channel 5 set up i'm still confuse and not clear in case of plane set up tks👍

[DannyFPV]

Feels over my head at the moment since I just upgraded to ETX today for keeping up with the hobby and for moving toward ELRS. Is there a beginner course? I’m thinking of picking up the radio master ranger micro. Where should I start for learning and prepping for ELRS?

[batmojuice]

I seem to always have the Wi-Fi connection issue. I found that, once in Wi-Fi transmit mode, turn off the Wi-Fi on the PC, then turn it back on. Then it magically shows up on the PC’s network list. I’ll try the browser trick you mentioned the next time I flash one that won’t connect. Thanks.

[mikeltxi]

Sorry for the question, but in another video made by you, called "expresslrs link telemetry • how to set up" you say that to configure the rssi on the radio, the values are 50 low alarm, 20 critical alarm. But in this video you are saying 75 and 65. So what is the correct configuration for the rssi in the radio?

[terminsane]

I got a matek elrs diversity rx and im scared to install it in anything.
Apparently minor temperature changes causes frequency drift and loss of connection. Matek recommends desoldering capacitors....

[mainframecn]

When I set my packet rate to 333hz, INAV doesn't seem to get any input from the receiver. Change it back to i.e. 250hz it works again. Am I missing some setting somewhere or could it be a limitation on the receiver? (i have updated both TX & RX to see it that makes a difference)