filmov
tv
Arduino MIDI controller - DART SPECIALE - Pitch-Bend control & Scale-Learn function
Показать описание
This video exemplifies different features of a DART device:
1) MIDI FEEDBACK:
the DIN MIDI OUT connector of the Dart controller in connected to the DIN MIDI INPUT of the Roland Super JX synth, so the synth can be played from the dart controller buttons.
the DIN MIDI OUT of the Roland Super jx is connected to the DIN MIDI INPUT of the Dart device, so the keys that are pressed on the synth keyboard will produce a visual effect on the Dart panel: the LED corresponding to each note will light up.
2)TOUCH RESET function
on the first preset_page of the Dart controller, the TOP and SIDE sinners are set to emulate a Pitch Bend lever. Using the TOUCH RESET function it is possible to rotate the spinner to modify the pitchbend parameter and when the touch sensor is released, the pitchbend parameter is reset to an intermediate position.
3)SCALE LEARN
on the second preset_page of the Dart controller, the TOP spinner is set in SCALE LEARN MODE, so the touch sensor can be used to record a scale of notes, that can be played through the spinner rotation.
👽
1) MIDI FEEDBACK:
the DIN MIDI OUT connector of the Dart controller in connected to the DIN MIDI INPUT of the Roland Super JX synth, so the synth can be played from the dart controller buttons.
the DIN MIDI OUT of the Roland Super jx is connected to the DIN MIDI INPUT of the Dart device, so the keys that are pressed on the synth keyboard will produce a visual effect on the Dart panel: the LED corresponding to each note will light up.
2)TOUCH RESET function
on the first preset_page of the Dart controller, the TOP and SIDE sinners are set to emulate a Pitch Bend lever. Using the TOUCH RESET function it is possible to rotate the spinner to modify the pitchbend parameter and when the touch sensor is released, the pitchbend parameter is reset to an intermediate position.
3)SCALE LEARN
on the second preset_page of the Dart controller, the TOP spinner is set in SCALE LEARN MODE, so the touch sensor can be used to record a scale of notes, that can be played through the spinner rotation.
👽
0:00:57
DART Korova Speciale - Arduino MIDI controller
0:00:59
DART - Arduino MIDI controller - button, led, pot - how to connect
0:01:35
DIY USB MIDI CONTROLLER With Arduino Uno Rev 3 #arduino #controller #midi #studioone
0:00:24
DIY Arduino MIDI controller
0:05:06
Fliper Dj review - DIY Midi Controller with Arduino
0:25:03
Arduino based USB to MIDI adaptor
0:00:31
DART - Arduino MIDI controller - NoMobo setup
0:00:26
DART - Arduino MIDI controller - Touch sensors
0:00:41
DART - Arduino MIDI controller - Tuchsensors & apples @WEMAKE Milano
0:01:00
DART - Arduino MIDI controller - Preset uploading
0:00:49
DART - Arduino MIDI controller - light feedback
0:00:58
DART - Arduino MIDI ontroller - Analog joystick used for MIDI control.
0:00:59
Dart KOMBAT - Arduino MIDI controller
0:01:27
DART - ARDUINO MIDI CONTROLLER - SKETCH UPLOADING ON LEONARDO
0:00:57
DART NOIR - Arduino MIDI controller
0:00:45
STRATOS - Arduino MIDI controller - Touch-stop function
0:01:00
Arduino MIDI controller - DART SPECIALE - Pitch-Bend control & Scale-Learn function
0:00:59
DART - Arduino MIDI controller - Toggle mode & Toggle groups
0:00:51
STRATOS - Arduino MIDI controller - touch-stop function - part 1
0:08:01
DART - Arduino MIDI controller - button board assembly
0:06:58
DART - Arduino MIDI controller - potentiometers board assembly
0:00:49
STRATOS - Arduino MIDI controller - Scatching with NI Traktor
0:00:52
Arduino UNO - MIDI over USB hacking (Dart midi controller)
0:00:23
Arduino + MIDIUSB + Rekordbox DJ
Комментарии