I Built a BUDGET Emachines Sleeper PC!

I transform an old #emachines #computer into a #sleeperbuild #gaming #PC on a #budget

Music by @WhiteBatAudio

[RobertFixit]

Are you making fun of my Civic? The wing creates so much downforce that I can pop a wheelie around 88mph 😂😂😂

Nice clean build. Down to the classic stickers. You should post it for sale with only a front shot and the FPS it gets and let people flame you.

[LowcastleTech]

sleEp-Machine 🙂. Another excellent video!

[DevonDoesTech]

💤💤 It would only have been better if it could actually cook rice while it was gaming!

[annabellelee]

Great video! Interesting. Learned something new. The end was priceless 😂!

[MattBruzdziak]

I have an old D100 or D300 Insignia tower than I plan on building in. The MB that I have to put in it is a Lenovo b550 board. But, It's either upset with the CPU (r7-5700g) or the RAM. I get 2 separate beep codes with ram slots fully populated or no RAM. So, I have to save up some $ and find a r5-5500 to test with it. I know it's not the RAM sticks since I tested them on a known good CPU/MB combo. I think it's a BIOS/UEFI compatibility issue. Then, I have a Vega 64 gfx card I plan on repairing (hopefully it's just a resistor gone bad. typical vega issues). Then, it can be my daily PC.

[DogeMcLovin]

We're so lucky many desktop component dimensions were standardized early on. It would be nightmarish without!

[mattparker]

@50 Shades let me know what you're doing with the system RAM. I want to upgrade our old family PC, I've got the GPU already.

[mattparker]

This is the 69 of PC sleeper builds NOICE!

[mattparker]

9:45 please tell me your going acrylic on the side panel, otherwise this 'sleeper' isn't finished yet...

[walterlegere]

I've got the same case (T1510). found an ASRock A520M/AC MATX Mobo, Ryzen 9 3900X, Radeon RX 6600 8GB, 32GB DDR4 3200 RAM, EVGA 80+ Gold Supernova modular PSU, WD 512GB NVMe M.2, 6TB WD 6003ZZBX 7200RPM storage drive and I swapped the face plate and tray cover of the original IDE DVD RW drive with a similar SATA drive so I didn't have to use the converter. I hate those things. The PSU leaves me with about an inch clearance between the DVD and the PSU cables. I also added a case fan in the lower front to pull air into the system but it meant I had to remove the lower front I/O panel and drill some holes to make it work. I installed a 100MM case fan in the rear to pull air out. I'm a bit worried about the GPU temps because of the lack of ventilation. I'll have to keep an eye on that.

[aptXH-AAX]

how could you call it garbage when it outperforms my GTX 1060 today