Arduino Radar System

Hey friends in this tutorial i will show you how to make a Arduino Radar System.

Materials:-

Follow me on:-

snapchat:- viraldodhia20

---------- VIRAL SCIENCE © -----------

[Jirayu.Kaewprateep]

The ultrasonic motion detector can select surface as area but it is capable of properties of the materials that depend on opening gaps and you select the correct choices for working with variety of objects detecting because you can create harmonics frequency.

[ozgecelik]

couldnt reach your links to take processing codes:(

[vijaypawar]

2:45 Why you need to apply the precious hot glue there while already there is a double sided tape?

[javiercervantes]

I just finished this project had a lot of fun doing it thanks!

[kevinchouinard]

Having the sensor out so far on a stick makes the geometry of the display incorrect. The sensor should be on top of the rotation point.

[t_sixtyfivex_wing]

ok many people say this is sonar or but he hits the point that show how to locate the object by and send it to screen, his display solution is very accurate detail, i like the angle and distant very much, thank you very much for your solution and i m waiting for your new video, Thank you. } return 0 }

[ledogu]

Looks great, I new enough it over my head. I would need a lot more info and step by step instructions with the radar serial code and libraries.

[shahraj]

Can you please guide me, my project is not working properly, the servo is rotating 1 degree at a time in both directions and not continuously, but when I am commenting the call function "distance = calculateDistance()", the servo is working fine, but the serial comm is not working since I have bypassed in the program. I am not able to trace what the problem is ?

[shekharkumar]

Good one after a long time that differentiate you from other YouTubers .thumps up!

[ngh]

Great project! There are some spikes tho, have you tried to filter the signal? I made a similar radar too with 4 ultrasonic distance sensors in 4 directions and changed the servo to a stepper motor, and 3D printed the case.

[suryakantyadav]

Hi, Thanks for the information. what do you, how much distance does it cover

[tylerlooney]

Is the animated portions of the video of connection of wiring of the ardurino the software program it uses of just demonstration on how to wire it up

[christiandebellefeuille]

Sometime it look like there's some "misread" (wrong value read) ... there's red line when there's absolutely nothing. And yes, I'm aware of the curtain but at arround 6:25, between the 2 objects, it detect something when there's nothing. Any idea why you are getting this kind of behavior?

[danyalwahdat]

When I make a separate programme for servo motor it runs smoothly but when I give command of full programme in that the servo motor rotates very very slowly and also stepwise very slow so what is the problem in this kindly provide me the solution . Thanks 🙏🙏

[inanitas]

You did a good job at stealing "How to mechatronics" project man.

[soummosupriya]

why in processing code ...i find com5 as an error ...help me to solve

[davidwhite]

If you put an object behind another would it only register the nearest object and not the one behind it (given same size and dimensions)?

[Administrator_O-]

That is freaking awesome! It'd be cool to install it in your car! Why? Because you can....

[raytf]

Sarika Gupta, the software name was written while he was on the software on the bottom-left corner: Fritzing

[Msopasniful]

Hello. I have 1 problem. When I connect the sensor and the servo to the arduino uno, the servo motor goes very slowly, is there a problem with the power supply? Do I need to make some external power supply for the servo motor? I see that you also used Uno and these two in the project and it works at normal speed.