Mercedes-Benz GenH2 Truck & eActros 300 Tractor

Mercedes GenH2 Truck & eActros 300 Tractor refueling demonstration, presentation
The eActros 300 tractor variant completed regular and practical deployment tests in and around Innsbruck. The vehicle is compatible with all common European semitrailers, taking into account the maximum permitted total tractor/trailer combination length. The electric semitrailer tractor is based on the same technology as the eActros 300/400. Three battery packs, each with an installed battery capacity of 112 kWh, enable a range of up to 220 km on a single battery charge. The eActros 300 Tractor can be charged with up to 160 kW: The three battery packs need a little more than an hour to be charged from 20 to 80 percent at a standard DC fast charging station with a charging current of 400 A. As part of a series of tests, the electric truck already successfully negotiated the Arlberg Pass in Austria last year. Some sections of the tests were carried out at an altitude of over 1,800 meters above sea level. Series production of the semitrailer truck is scheduled to start in the fall of this year.

Battery-electric in long-distance haulage: Start of eActros LongHaul series production in 2024

The eActros LongHaul has a range of around 500 km on a single charge and is expected to reach series maturity in 2024. The batteries used in the eActros LongHaul employ lithium-iron phosphate cell technology (LFP). These are characterized, above all, by a long service life. The batteries of the production eActros LongHaul can be charged from 20 to 80 percent in well under 30 minutes at a charging station with an output of about one megawatt.

Daimler Truck sent two prototype variants of its Mercedes-Benz GenH2 Truck on tour in Tyrol. For several days, the variant powered by liquid hydrogen covered a 70 km route between Innsbruck and Brenner Pass. With around 2.5 million truck transits per year, the Brenner Pass is one of the main arteries of European freight transport. The vehicle/trailer combination was loaded to a combined gross weight of 40 tons for the journeys. At the same time, another prototype of the GenH2 Truck, powered by gaseous hydrogen, covered a 40 km route between Innsbruck and the village Axamer Lizum located at an altitude of 1,560 m above sea level. Here, the deployment of the fuel cell was demonstrated at various altitudes in a demanding topography. The vehicle was refueled at an in-house hydrogen refueling station run by Austrian food company MPREIS. In its own electrolysis facility, MPREIS produces green hydrogen directly on site using renewable energies at the company headquarters in Völs and made it available to Daimler Truck for its test and demonstration runs.

In the development of hydrogen-based drives, Daimler Truck prefers liquid hydrogen. In this aggregate state the energy carrier has a significantly higher energy density in relation to volume compared to gaseous hydrogen. As a result, more hydrogen can be carried, which significantly increases the range and enables comparable performance of the vehicle with that of a conventional diesel truck. The development objective of the series-ready GenH2 Truck is a range of up to 1,000 kilometers and more. This makes the truck suitable for particularly flexible and demanding applications, especially in the important segment of heavy-duty long-haul transport. The start of series production for hydrogen-based trucks is planned for the second half of the decade.

Thanks for supporting:

► Comment & Like 👍
► Subscribe and Share ✔️
► Turn on the bell to never miss an upload! ((🔔))

#mercedes
#eactros
#fuelcell