PreSonus Studio 192 Mobile Audio Interface Review by Sweetwater

Mitch Gallagher presents the PreSonus Studio 192 Mobile audio interface. With this flexible USB audio interface, you can simultaneously stream up to 26 inputs and 32 outputs at 48kHz (8 x 14 at 192kHz). For plug-ins, you've got Studio One Fat Channel processing on all analog (and the first eight ADAT) inputs, all while monitoring with amazingly low latency.

The Sweetwater Minute, Vol. 335

[gordieman]

Mitch's overviews are precise and to the point with no BS

[JPDC]

Phenomenal tutorial, wow, you answered so many questions for when I have to track vocals on location w/my 192. Thanks!

[TheUnbornBand]

Having a seriously hard time deciding between PreSonus 192 or Zoom UAC 2 or 8... what's the best way to connect midi to the studio 192? Zoom has a midi in/out, and PreSonus has opted out.

[tonymelizza]

cool....right on, this is a very useful helpful recording tool !

[philfyphil]

There are one or two things here that I fundamentally don't understand. Why not just have the Z switched on all the time? Why would you need to ever switch it off? Also, if you have the fat channel DSP enabled and using some of the effects and do not duplicate it as a software plugin, when you master the song down to stereo would the fat channel effect be carried over in to the mix?

[derrickchapman]

I like how u deliver but can u also use other plugins Thats not presonous i own the mobile in studio professional

[retsmej]

just what i'm looking for. thanks !

[TheCandoheavy]

Hello, I have a Presonus Studio 192 mobile and 2 Behringer ADA8200, but can not make them work properly, I hooked them up first Behringer unit Out- first in on the presonus, and Behringer second unit out- second Presonus in.
The same with the Presonus OUTs to the In of each Behringer Unit.
I am able to record audio with the first Behringer and the Presonus, but no audio out from the Behringer, just jitter or cracks.
Can't make the presonus sync as slave and Behringer as master.
On my presonus Universal Control page it only lets me setup as Presonus internal sync.
But the only way it works is when I change my Behringer to Master 48k, and it will record from all 8 ADAT channels, but won't playback audio, just jitter. Doesn't make sense, but thats the only way it's working or getting signal to my DAW. I am using REAPER 5, set to 48k also.
Can someone help me to configure the 2 Behringer ADA8200 and the Presonus 192 mobile to make it work in REAPER 5? I don't see why it is not working right, What am I missing. I have 4 lightpipe ADAT cables ( 2 outs and 2 Ins ) and 2 BNC cables, 16 XLR cables for the Behringer outputs to outboard gear + 16 Cables for Ins.
In theory I should have the Presonus as master and the 2 Behringer as slaves at 48k.
Presonus Internal Sync, 2 Behringer ADAT slave switch selected, maybe BNC cable somewhere? Tried different ways, but can't make it work? Can't sync Presonus as Slave, Maybe missing something in Reaper, any suggestions on how it could be connected, witch one should be Master and slave to get audio IN ans Out from the ADATs, Thanks a lot Guys.

[TheRealCatBurger]

This Device has a max. of 22 inputs and 26 outputs! No idea, how you come up with 26 ins and 32 outs, when it gives the correct number on the front panel of the device as well as in the UC-Surface!

[sicsey]

How do you assign all the inputs from the back of the 192 to the Main Level Knob at the front of the unit? So you can use One volume level for all outputs including the Main Mix

[JamesLangevinMusic]

What happened to the Midi inputs??? Useless without that.

[dehamellin]

does it have lower latency due to usb 3.0? how much?

[prymordialthoughtsalt.rapf]

It only connects to mac via 2.0 and not 3.0?

[OPTIONALWATCH]

Does it come with the recording software Studio one 3?

[CambioDeTono]

does someone know if I could hook a Studio monitor V2 (presonus) to one of the outs (let's say 3/4) to get extra speaker outputs and headphone outs? I know that the Dp88 can give me more inputs. But I want to have more reference monitors, with this out puts I can have 2 pair of monitors(a & b) and a sub (c), but what if in B I connect a Studio Monitor Station V2 to get from there 3 speaker outs instead of 1 plus the headphones? Is this possible or am I tripping ? lol .. thanks !

[Elegant]

is there any need of buying mic preamps if i get this soundcard? I want to record vocals with this and smb7b ? any tips?