DuB-EnG: XTAR L4 Charger and Rechargeable Lithium Ion AA batteries put to the test....

preview_player
Показать описание
Lets have a quick technical review of the new XTAR 1.5V Lithium batteries and charger...

Also available on amazon
Рекомендации по теме
Комментарии
Автор

Thanks for the noise test. I was going to get these for my ft817 radio tranceiver. That noise is a deal breaker

noimnotarobotcanubeleiveit
Автор

I tried a set of these in a dab/FM/Internet radio hoping they would last longer than Eneloops. I live in a very strong dab signal area but the noise from the internal circuitry in these batteries interfered with the dab reception so much that I could not use them. They were ok on FM and internet though.

brucejoseph
Автор

Excellent information / review. Thank you.

tsbrownie
Автор

Well thanks to my electricity principals class back in my first semester, I actually understand everything lol. Thank you for running the test. I was just looking at the two AA options from xtar. Guess I'll do some further research. Of course I know better than to trust manufacturer specs.

JayP.
Автор

I bought these lion batteries, they perform that well i bought 12 more and binned my nimh batteries 😊

petersimms
Автор

what is the difference between xtar BC4 charger and xtar L4 charger?

ineedanswer
Автор

I have tested two brands. One claims 3600 mWh produces less than 1800 mAh another claims 3500 mWh and produces over 2200 mAhs. Both needed to be cycled a couple times to give a good reading. The first had two dead batteries out of 12 after three charge cycles (at 500 mA) Good investigation about noise. I have not noticed a problem in my trail cameras but other people have. You can not judge the batteries by the claimed mWh.

frankenfoamy
Автор

Perhaps they have a problem when connected in series.

pault
Автор

I would have thought because they were lithium they would deliver the full 1.5 not 1.38. 1.38 would be expected for Nicad or metal hydride. I would buy them if I was sure I was getting 1.5 but now not so sure. Could your tester be wrong since it doesn’t recognize it as lithium. Just curious

robertfallows
Автор

4:05 It looks like the slide switch on the probe is set to X10, not X1?

Found your video while looking for someone putting these XTAR batteries through a proper discharge test. Testing inside electronic devices is neat and all, but actually testing the capacity and comparing against the claims is really the only way to rate a product like this, especially in a market rife with bogus claims. Thank you very much!

nomakewan
Автор

thank you for measuring the noise as well. I bought some Hixon recently and wanted to use them in my weather station capable of receiving the DC77 time and weather data over terrestrial broadcast at 77 kHz - and it didn't work anymore with these batteries. Are there any batteries of that type without that noise? Can I shield them somehow?

GuardianOfRlyeh
Автор

What would be the effect of using these in an audio recorder considering the noisy voltage? Thanks

dan.hampton
Автор

Is it possible to wrap the battery bay with shielding, directly ground it to the batteries negative to isolate the device in use from those emi? I really want to use this in my multimeter as it couldnt take freshly charged eneloop @ 1.2v without low voltage warning. Lithium energizer is good but I dont like disposable battery.

primonda
Автор

hixon vs kratax? would be interesting comparison

fatll
Автор

How is the battery holding up now? Any issues?

mjmj
Автор

Hello, does this charger work with USB-C PD power sources? I mean, it takes 5V all right, but what I want to make sure of is that would it work correctly and take 5v with 100W PD charges and cables (that power macbooks etc.). I want to buy the item but want to make sure before buying because I don't want to invest for a new brick and charger just for this. Thanks in advance!

ardatubes
Автор

If you really need 1.5v/cell then fine but I'll stick with NiMH, not only cheaper but so much quieter.

bws
Автор

Take it apart and give it a clean, and it will work again, I had a leak on one of mine so took it apart and cleaned it so it is now back outside working again, they cost too much to throw away.

MrBobWareham
Автор

Not good news on the camera, can we see inside, find the extent of the damage, you're handy with a soldering iron.

I recognise that plastic cup on the bench at the end!

JackBealeGuitar