Kinematics of Machines | Velocity Analysis | Four bar mechanism | Problem 1

More videos on the basics of #kinematicpairs #inversions and joints will be uploaded in the near future.

The book that i will refer for this entire course is
1. #TheoryofMachines by S.S. Rattan.

2. TheoryofMachines by R.S. Khurmi.

3. TheoryofMachines by R.K. Bansal


Thanks Everyone and have a great time.

[krishnashukla]

Literally u r the best and very helpful for us ❤

[renu]

i never thought it would be possible to understand this so easily

[Deepaksharma-lnbn]

Superb sir
Your way of explaining was just remarkable

[kherdhruv]

Hello sir, can you make videos on analysing Degree of Freedom for planar mechanism, I have been facing problems in getting the right answers when there are complex mechanism, with slipping and not slipping? Your videos are very helpful.

[kujojotaro]

Sir we need an explanation on Acceleration analysis also plzzzz sir

[NEHAKUMARI-mgot]

Now it's easy to understand this topic after watching your videos..really thank you sir..

[shahilaniyeri]

Thank you sir, the tutorial was very helpful. I had a request, if you could also upload a tutorial on how to construct acceleration diagram.

[hey_developer]

Thanks for your explanation. This is really helpful for me. As an average student i too could understand this. Thanks alot

[yokaijohnny]

Sir, your video always help me alot..
Respected sir, can you help me by making the solution for this question? Below..my internals will start from Monday and im literally only 40% of knowledge about kom in my head..

Question: In a slider-crank mechanism, the crank is 480mm long and rotates at 20rad/s in the counter-clockwise direction.The length of the connecting rod is 1.6m .When the crank turns 60° from the inner dead centre, determine the -1) velocity of the slider.
2) velocity of a point E located at a distance 450mm on the connecting rod extended.
( The question is from theory of machine by SS Rattan 3rd edition)
I would be very grateful to you sir.

[pritimandal]

Sir, you are great. My all doubts are cleared. Thanks a bunch.

[nandipatisai]

sir, please start these series from starting basic topic

[husnainhyder]

Sir
You are cool
Can you please upload the whole lecture series of design of machinery
You have a way
There are no such lecture series on YouTube this course is difficult but you nailed it
This course become difficult when we go construction method don't really know how to do it
Thanks but please help in this matter

[aianhvlog]

Sir I have a question about Mechanical Advantage? What the meaning of it. and What the advatage of Instant center method vs graphical velocity analysis? Thanks for clear explanations

[ಕರುನಾಡಕ್ರಿಯೇಷನ್ಸ್]

Thank you so much sir... Please solve difficult problems sir

[r.ariosukodh.]

Dear Professor, which video those should watch first before this playing list? Thx in advance .

[pramodkumar-ejlz]

Sir plz explain what is mechanism and inversions for slider crank...

Whirling of shafts

Vibrations . In that how find out frequencies

[ayyagarisrujana]

Sir very good teaching..can u please make videos on fluid mechanics and hydraulic machines? Or atleast tell me what is the best book to be referred as I'm preparing for gate..

[aakashsigdel]

4:15 If we consider C as a base of angle BCF, shouldn't the clockwise inclination cause the point F to lie above instead of below? I am confused

[brianodhiambo]

sir what criteria have you used to come up with a scale of 0.525 m/s to represent 50mm?

[jeremytimothy]

Hi sir could you create a lecture series on Cams also, Simple harmonic motion, Uniform velocity and uniform velocity and Retardation, as well as cam profiles too 🙏