Car Tire Valve Stem Renewal - Without Removing the Tire

Removing and replacing a tubeless tire valve stem without the need to remove the tire from the rim. This kit makes the process quick and easy and can be done in less than a minute. This video also shows the process from inside the wheel so you can see exactly how the kit works. NOTE: This tool is only for use with standard valve stems. If your vehicle uses a tire pressure monitoring system (TPMS) then you will need to remove the tire to replace the special sensor valves. Also, only use a rubber-friendly oil or grease to lubricate the valve for insertion. Petroleum-based greases will degrade the rubber over time. If you find my videos helpful, please support my channel using the 'Thanks' button below each video.

~~~~ Part Links ~~~~
As an Amazon Associate I earn from qualifying purchases.

Thanks for watching. If you find my videos helpful, please subscribe to my channel !

Disclaimer:

Under no circumstances will Knobsdialsandbuttons be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Knobsdialsandbuttons or a third party. In no event shall Knobsdialsandbuttons be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Knobsdialsandbuttons, it cannot guarantee against improper use or unauthorized modifications of this information. Knobsdialsandbuttons assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Knobsdialsandbuttons recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Knobsdialsandbuttons, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Knobsdialsandbuttons.

[chadmanz]

Well done video. No clutter, right to the point, shows and describes everything clearly and concisely. Thank you!

[mitchd]

You sir, are the greatest video producer in the history of the youtube universe! In less than 4 minutes you've shown the first person and behind the scenes views of removing and installing a tire valve without speaking a word nor playing irritating music.

[pedrosmits]

And still you removed the tire, for the great inside view 😊 . Nice job, great explanation 👍

[ruudwilschut]

Just like the mushroom plug video, again a very nice and clear video. Didn't know this handy tool exists at all!
Nice to know this tool exist. Thanks again!

[yhuang]

thank you. love to see the video to show inside of tire how it works.

although my problem was fixed. I purchased those fancy "cool" aluminum tire valve cap from aliexpress. they're shining and very cool. But after a whole winter season, I found that I can't get those cap out - those aluminum cap attached with copper valve so "well" due to salt/snow. all 4 tires are same. I just can't get the cap out. so eventually I asked car dealer to fix for me. they might use the same tool.

never ever buy those aluminum tire valve cap specially for people who living cold area.

[Japplesnap]

No hook needed. The same tool used to install the valve can also be used to pull the old one right out. Ive done it myself a thousand times as a mechanic.

And for what it's worth, that tire needs to be replaced. The cracking on the sidewall is from dry rot.

[campbellmorrison]

Clever tool, not sure why you would need to replace a valve stem but I know how to now :)

[HeberPerez-ixsg]

Muchas gracias amigo por su tutorial tan explicito y tan necesario en circunstancias dificiles donde tenemos que resolver.Lo felicito, pues con su video, ya no tendre otra emergencia..

[mrsamsung]

No nonsense video of the century...😮 and I normally don't leave comments

[Thelegend-zd]

I believe the white paste is caller VEINER-SCHLIEDIN.

[angelisone]

Good luck trying to remove ATG's by trying this.
Many vehicles after 2008 have ATG's TPMS sensor. The first supercar has ATG's was Porsche 959.

[MrFictionfactory]

I have the same air compressor from Parkside. Nice, usefully tool...

[michaeltammaro]

Outstanding Sir and thank you for this info. Bravo! This was great.

[robertosantallana]

Always replace the valve stems when getting new tires! Valve stems dry rot and produce blow outs! Leaks! And fail to fill tires over time! A very small investment that can safe your life!

[jimbefit]

I bought one of These in the 1980's! Sold by Liyle? Lysle?(Sp) i split the funnel one year, so its been mostly useless for decades! But it worked. Be careful how large a mushroom head is on the tire valve! The smaller ones probably won't split the plastic funnel.

[RustBeltRides]

Great product, is there a tool for a 90 degree valve stems for use with smaller ATV rims

[nightwalker]

Good luck. Better off going to the tire shop.

[mtay]

works on steel rims only. Will damage valve hole if used on aluminum alloy rims

[woodman]

I like it. Can this tool be used on utv tires?

[CuriousKL]

Not trying to be condescending, but what good is a Valve Stem Renewal tool these days when every car, except classic or antiques have those fantastic wonderful little tire pressure monitor devices that replaces the tire valve?