Speedometer Cluster Diagnostic Test - Nissan Micra K12

Thanks for watching. Please comment, like and subscribe !.

Malfunction Chart for “Error 1” and “Error E”:

Error ‘1’ (Bit 0 to 3)

Bit ‘0’ (Speedometer input signal)

Bit ‘0’ displaying ‘1’ - No input signal. When no signal is detected for 30 seconds continuously with the ignition ON, it should be judged as signal malfunction (If input signal is detected later, then the error will be cancelled immediately.)

Bit ‘0’ displaying ‘2’ - Unusual input signal. When any signal of frequency which would not exist in normal conditions is detected, it should be judged as signal malfunction.

Bit ‘0’ displaying ‘0’ - No Malfunction

Bit ‘1’ (Tachometer input signal)

Bit ‘1’ displaying ‘1’ - No input signal. When no signal is detected for 30 seconds continuously with the ignition ON, it should be judged as signal malfunction (If input signal is detected later, then the error will be cancelled immediately.)

Bit ‘1’ displaying ‘2’ - Unusual input signal. When any signal of frequency which would not exist in normal conditions is detected, it should be judged as signal malfunction.

Bit ‘1’ displaying ‘0’ - No Malfunction

Bit ‘2’ (Fuel level input signal)

Bit ‘2’ displaying ‘1’ - Short circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as short-circuit malfunction.

Bit ‘2’ displaying ‘2’ - Open circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as open-circuit malfunction.

Bit ‘2’ displaying ‘0’ - No Malfunction

Bit ‘3’ (Water Temperature input signal)

Bit ‘3’ displaying ‘1’ - Short circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as short-circuit malfunction.

Bit ‘3’ displaying ‘2’ - Open circuit. When short circuit of the signal line is detected for 5 seconds or more, it should be judged as open-circuit malfunction.

Bit ‘3’ displaying ‘0’ - No Malfunction

Error ‘E’ (Bit 4 to 7)

Bit ‘4’ (Reset buttons)

Short circuit for reset buttons. When the short circuit is continuously detected for 5 seconds or more it should be judged as short-circuit malfunction.

Bit ‘4’ displaying ‘1’ - Right side reset button has malfunctioned

Bit ‘4’ displaying ‘2’ - Left side reset button has malfunctioned

Bit ‘4’ displaying ‘3’ - Both reset buttons have malfunctioned

Bit ‘4’ displaying ‘0’ - No Malfunction

Bit ‘5’ (CPU)

Bit ‘5’ displaying ‘1’ - CPU ram malfunction

Bit ‘5’ displaying ‘0’ - No Malfunction

Bit ‘6’ N/A

Bit ‘7’ N/A

All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.

Read important information below:

Disclaimer

Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[Oh-Jay]

Good man, could save people money with these tips, and hair and maybe the odd marriage...
I especially like the replacement throttle body reset sequenece ....haha

[YugoRr]

Thanks for the clear instruction. Do you know how to check which airbag(connector) is faulty as the airbag light is blinking?

[n-mosfetfuse]

Hi, I also have a Micra exactly the same model and if you could film the disassembly of the gas purifier and its cleaning or replacement ... because I don't know where the part is...