DJI MIC 2 Firmware Update (EASY step by step guide)

In this video I will show you how to update your DJI MIC 2 firmware.

⚡️FEATURED GEAR⚡️

Use Code CREATIVE20 to save 20%

***Use Code: "CREATIVE10" to save 10% on your Plan!***

💡 MY FAVORITE GEAR

LET'S CONNECT

TIMESTAMPS
00:00 - Intro
00:08 - Check Current Firmware
00:42 - Update DJI Mic 2 Receiver
03:08 - Update DJI Mic 2 Transmitter
04:16 - Confirm DJI Mic 2 Update

DISCLAIMER
Some of the links in my video description are affiliate links, which means I will make a small commission if you click them and make a qualifying purchase, at no extra cost to you :)

[russia]

WOW! You're the only one who said to remove the USBC/Lightning adapter! finally worked! all other videos and forums were useless.

[CarSceneKorea]

Best video, step by step. One thing though, transmitters need to be powered on - unlike the receiver - before connecting(using Mac here) to get the update running. This is with the latest update released in August, 2024.

[TrentTheTraveler]

Can someone please tell me why 1 of my transmitters is showing up with a "microphone" icon on my receiver while also not recording audio? Whereas my other transmitter is showing up on my receiver with a "speaker" icon and it IS recording audio? I can't find any information about this anywhere on the internet... For reference, at 4:17 both of your transmitters are showing up on the receiver screen with speaker icons next to the audio levels.

[JaysonJudson]

Great Video - Appreciate you gave us time expectations on the transmitter as I would have been wondering if I made a mistake or not. Also, like how you said remove the adapter from the transmitter as I couldn't find out why computer wasn't recognizing the transmitter.

[EverydayMuscle]

This tutorial was spot on. I got my setup updated in just a few minutes.

[NorthManFishing]

Thanks this was alot easier than the sheet they give you for updates

[Midlife]

Great video, easy to follow and I’ve now managed to update my DJI mic2!!!
I was going to throw my computer through the window so you have been so helpful!!
Thank you so much!!

[CadeMeuPassaporteMarcos]

Thank you. Just updated for the second time the whole system.

[mrspeeddemon]

Thanks for the video. Just got my Mic 2 and updated per your video instructions. Hella better than DJI's video. Appreciate the detailed step-by-step.

[sutv]

Ben, I'm new to the channel and I'm lvoving it. Thank you. Just go my Mic 2. You make it easy.

[alltj]

2:08 to update, it needs to remove the current operating software in the device before dumping the new one, so this part won’t be quick… the transmitters are low-jack, have less operations as they are more like slave to the receiver so not much to replace in comparison….

[Eric_Feigl]

Great video, thanks! Any information on how to link a DJI transmitter that was purchased separately to a receiver that already has a transmitter linked?

[trexpeditiongotravel]

Just purchased mine. This video is very helpful, thanks!

[MrRudyc]

Thanks for your help. I can’t get mic/transmitter to link. One links with no problem, but #2 is giving me a headache. I will try to update everything and see if this works.

[tokke]

So is the problem already fixed where there apparently was a difference in sound between the 2 mics? Thx for the nice video

[twnrbo]

I have never had an issue with updating the firmware on my Wireless Mic 2 before, until now. No matter what I do, formatting the storage, factory resetting, etc. I continues to say there is not enough space to update. My Mac SSD has 350gb left, so it makes absolutely no sense.

[summaof]

Literally just got it today and I'm about to figure out how to incorporate it with my Sony fs5. Any help would be greatly appreciated.

(saving up for a fx3 but mortgage won't let me be great 😂)

[DigitalTrapping]

I just bought mine and got them today bro

[corporaldonut]

hi, no matter what I do the transmitters will not update. Is there some sort of trick or maybe some setting I may have missed?

[Goofydays]

A question after I put the file in the folder for the receiver in the installation stage it SES failed to install what should I do?