Breville Hot Cup - How to use the Hot Water Maker

The #Breville HotCup is a convenient hot water dispenser that provides instant hot water at the touch of a button. Here are some instructions for using it:

1. **Identifying the Parts**:
- **On/Off button**: Lights up blue when in the on position.
- **Lid**: Press the lid release button to open and fill the water tank.
- **Illuminated water reservoir**: Holds up to 1.5 liters.
- **Heating chamber**: Boils 250ml of water¹.

2. **Using the #HotCup
- Make sure the on/off switch is in the off position.
- Plug your HotCup into a mains supply socket.
- Place a suitable cup or container below the dispensing nozzle.
- Press the start button and wait for the water to be dispensed into the cup.
- Repeat until the desired amount of water has been emptied from your HotCup.
- If your HotCup won't be used for an extended period, empty it and perform several boil cycles before using it again¹.

3.

4 Safety Instructions**:
- Read the safety instructions before operating the HotCup.
- It's not suitable for use by children.
- Connection to the mains supply should follow guidelines.

Remember, the Breville HotCup is perfect for making hot drinks, soups, and noodles without the wait, as well as filling pans for cooking needs. Enjoy your instant hot water! 😊🔥🍵🫖⁴¹.

Source: Conversation with Copilot, 01/06/2024
I’m an Amazon affiliate

[jimbobs]

i had this on but it leaked so i replaced it and the new one did the same but it was good while it lasted

[martinwray]

Is it really hot enough for tea? To me, it has to be close to 100degC.

[MrSheffcity]

Is there a manual button for example if you want to add boiling water to a pan? Or a really big cup?

[lorainestables]

Don’t buy very noisy mine leaked after a month an dispensed 6 cups all at once .