Aspen Plus for Reactor Design and Optimization Intro

I cover how we use Aspen to optimize reactor conditions (pressure, temperature, feed composition) for conversion and selectivity. In this example, I'm using direct DME synthesis with an equilibrium assumption.

[babanzarah]

This is quite straightforward even for a layman. Thank you so much

[guttanaresh]

Thank you so much Steve, It is very helpful, even for science background

[meizaldiestu]

do you have a tutorial for simulating biogas production using aspen?

[shubhamkalan]

Getting similar results but I have problem in produced separation and DME purification. Please post a video regarding the same.

[tubeyouwatcher]

100 C gave me a 99.9% conversion, but I have my doubts about the validity and would have to do a deeper dive into experimental data too understand the limits of the reactions better.

[chemicalengineersai]

Hi Steve..why did you choose equilibrium reactor rather than stoichiometric

[sarahrmzni]

I need some examples about "manipulator."
Can you please help me?

[kromerdude]

Do you know how one could use the information gathered in this exercise to size a reactor?

[processengineerschannel]

I tested at feed temperature of 200c and same reactor temperature of 200c as well. I got 96% conversion and 98.9 selectively!!

How you explain this?

[aytennecefli]

If I ask, can you write what you said in the video? step by step. I did not understand some of them. i am foreign I want to apply what you say. pleaseee

[ramibecharalebfr]

I used to work on Aspen plus and now open search

[꼬북이-vf]

It looks better to use aspen simulation work book for case study. And then we can find optimal operating condition for conversion ratio

[hoyammustafa]

thank you very much, can you please check your email i have some questions