DIY Carb Sync Tool motorcycle car

How I made a Carb Sync Manometer at home for cheap $. Review of tool in my previous video that shows how it works. Hoses hook up to vacuum ports on carbs. With engine running, adjust carbs until liquid levels out on all four. Be careful not to suck ATF into carbs.
Restrictors---Dorman part# 493-021
.

[srdjankrajcer]

Can i put petrol instead of transmission oil like you did ? I think that would be the safest option and petrol is liquid enough, i am tuning carbs on gsxr 750

[TheMatrixcube]

syncing a fi bike is the same ;p

you can still use your tool to sync the throttlebodys vacuum

[ReMarkAbleMagic]

I've used this with just a clear tube, no restrictors or connectors, just zip ties and cardboard, though it was this video I got the idea from (thanks). My bike was a twin andas long as your tubing is long enough and you're careful it doesn't suck up any fluid. Works great though and if I make another I will use the tips from the video. At the time I had the stuff on hand and was a long ride to the store so I made do, but it worked fine.

[erhanalmas]

Tried but the manifold sucked in all the liquid ıts why

[halleffect]

thanks for this.
got some 1/4 clear tubing from home depot, had everything else. only needed a loop since only 2 carbs on the v-twin. no restrictor here but the ATF is heavy enough and I used a lot of tubing length and fluid, I think that helps the bouncing.

[crazyDIYguy]

Thank you for taking the time to make this I didn't want to have to buy one and wait for it. The synch tool

[ishankavinda]

Im try it suck oil all intake manifold its why help me

[siki]

Dear man, can i use tube 0.4mm diameter?

[davewheeler]

I can not seem to find the restrictor as well. Where did you get them?

[grimzop]

Where did you get the restrictors from? I tried doing it without but its impossible.

[joacorodriguez]

The problem wont be if it burns or not.. the problem is that any liquid that enters cylinder will exceed compression and break the engine (piston rod, or valves, etc)

[siki]

Dear man, i cant bleed hoses, how i can bleed?tnx

[owlteachereducation]

Brilliant. Thanks for sharing. What's the diameter of the clear tubing, Desrecording? I'm looking at doing this for my Triumph Thunderbird Sport 900.

[Maruti_motoshop]

Brother, if you set the air screw of the throttle, then the rpm will also change??



[mhsucio]

I made one on a 19inch tall board with fluids filled up to about 6 inches high and extra amount of tubing to run to the bike. does it matter how high I have it?

[bootsmanaa]

Hey man great video. i'm currently restoring a marauder 800 and need a sync but the tools cost too much, going to make one of these, but do you know where i have te most chance of finding one those restrictors? dont think my local auto store has them.

[georgeiacob]

What are those at the end of each hose?

[koihoshi]

Would this same principle work with 6 carbs?

[lokkas]

what size hole do the restricrors have?

[dariusandrews]

Thanks man.. Everybody hit the like button.