T V53 03 Universal LCD LED TV Controller Driver Board Review Test

Upcycle an old laptop LCD for HDMI and other monitor purposes.

***You need to set the jumper on the board for the voltage of your panel***
0:00 Intro
1:11 Old Screen Teardown
3:49 Screen Identification
5:54 Flashing Firmware
7:53 Set Panel ID
9:26 Final Test and resume

FAQ!
Q. Where can I get the firmware?
Q. Firmware does not flash
A. If the code is not loading then try another USB stick. Some people report problems with "unbranded" drives. Use a Kingston or similar. Finally check your 12 volt power supply can deliver 3 Amps.
Q. What LVDS cable do I need?

🔗 Please tell me if any of the links provided no longer work!!

DISCLAIMER: Unless otherwise stated all products shown in this video have been purchased personally. The description and video may contain links to products which might be affiliate links, so if you click on one of the product links I could receive a small commission. This does not affect the price you pay. If you do purchase through my affiliate link this will help fund future videos, thank you for your support!
#1nformatica

[fotoamgamgfoto]

I would like to thank you for beeing such a helpfull and friendy person and supporting me in my fight to make them work! Good to know there are people like you out there too!

[Em.P]

Thx for that info with the hidden menu, now i can let it be turned on by poweron and not having to switch it on aswell every time

[manuelgarciadelpozoalmendr]

Great video, thanks for the fix of the funky colors problem.

[wildchurch]

Thank you for this excellent tutorial - it made setting up the controller a breeze for me. Subscribed!

[alexprice]

Do you think one of these universal lcd controllers could be used on a larger TV that had a main board failure?

[jwd]

Thank you, I had a problem with a different board but your method helped me out.

[syduploads]

Great video, I have a Samsung panel LTN141AT03 14.1 Inch would this controller board be able to run it. Its also 30 pin.

[MattBrownbill]

Great video.
Will this work to fix an LED tv, or just CFL? backlit ones?

[cinimapayan]

My panel 1ch 6bit 40pin support this board?

[amigos]

Wow that's simply fantastic, such a great idea 💡 and workes great! Thank you for sharing this with us. Keep up the great work 👍 👍 👍

[kennyt]

hello,
My screen has the voltage and signal inverter joined in one connector. What controller board could I use?
The model is the LP140WH4-TLA1.

[Mr.TomMoon]

with the v53 my board my display was really dark and the display has 30 pin but the connector is only half the length, after update of firmware, the screen stayed all the time grey. No Menue in sight. time for a new board but not more the same.

[MamdouhFarraj-qqpl]

Thank you for this excellent tutorial
I have two problems
1- The firmware has not yet been uploaded after the USB flash install and the power cable is installed.
2. Remote control does not work

[ruvindurandeniya]

Thank you soooo much saved me!!! I thought it was a troubleshoot in firmware but I try this and I could find the solution for that!! Thank you again sir!! ;))

[furiasalvaje]

A question: In a Lg lcd tv ADJ is paired with A-DIM or P-DIM

[YosvelPenate]

Hi, do you know if there is some configuration to change the air tv reception settings cause I have one but it doents recognize any air channel

[NikhilHande]

How do you color correct the display from factory settings menu?

[ismaelmaises]

Acabo de montar la placa y la pantalla se ilumina pero no me aparece ni menu ni nada. Que debo hacer? Gracias

[ايمنعلي-زخ]

Is it possible to lengthen the laptop screen lighting wire?

[pradeep.ramalingam]

My lcd supports 1ch 6bit 30pin, what will happen if I use 2ch 6bit 30pin?