Front End Load 1.5m3 Waste & Recycling Plastic Skip Bin. FEL Truck v 40mm Solid Moulded Fork Pockets

preview_player
Показать описание
Plastic 1.5 cube Front End Load bin. No rust FEL miniskip: silent recycling collection & environmental waste management of refuse. Made in New Zealand, this is a world leading fully moulded plastic front end load bin, with integral moulded side fork sleeves. Proven extreme design strength with up to 40mm solid plastic. Rust free light weight handling provides safe and efficient refuse collection solution.

FULL HYDRAULIC PRESSURE DOWN IN THE FORK POCKETS

We actually wanted to lift the truck off the ground. PLAST-AX has made another product with unbelievable design strength engineering. Seeing is believing.

Footage compiled November 2017. The Plast-ax BN242 1.5m3 FEL has been tested in accord with requirements of British Standard BS EN 12574-2:2017 for front load waste bins less than 10,000L (test report available on request)

♦️ PLAST-AX Rotational Moulders: 4 Leamington Street, Wanganui, NZ

This bin has low fill height, light weight easy handing, large castor easy roll, lids that shut firm, optional lock down, tapered design for emptying, slimline and silent for CBD use, with a PLAST-AX superior finish for easy clean. You'll have no maintenance or upkeep hassles with this exceptionally strong, good looking FEL Bin.

NO Rust, NO Repainting, NO Corrosion, UV Stabilised, NO Colour Fade, NO Sharp Edges, NO Worksafe Risk

Silent Collection, FDA Food Grade LDPE, Impact Resistant, 100% Recyclable.

For the first time, an all plastic waste and recycling front load bin has the design and strength to handle any refuse, rubbish or recycling you need to throw in it: cardboard, food waste, glass, green waste, metal, paper, plastic and general commercial and industrial waste.

We use world-first dual moulding techniques to provide extreme design strength with all the inherent property benefits of a flexible low-density polyethylene. No other plastic bin has a continuous box section top rim combined with integral fully moulded fork sleeves with up to 40mm SOLID plastic. We manage all this with a total tare weight of only 89kg (With castors & locking bar.)
Рекомендации по теме