2 axis Brushless Gimbal by Banggood - Full Review!

In this video I'll do a stand-alone review of this 2-axis Gimbal from Banggood. Stand-alone means that I won't connect it to any flight controller. I'll just let it do basic Gimbal-stabelising..
You'll see a stabelised / non-stabelised comparison, an aerial view with the Gimbal and my final thoughts :)

DutchRC Adventures™.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world — is strictly prohibited without the prior written consent of DutchRC Adventures. We are not directly affiliated with any of the vendors or manufacturers in this video. DutchRC Adventures is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the DutchRC Adventures film series broadcast on YouTube is intended for entertainment purposes only.

[DutchRC]

In this video I'll do a stand-alone review of this 2-axis Gimbal from Banggood. Stand-alone means that I won't connect it to any flight controller. I'll just let it do basic Gimbal-stabelising..
You'll see a stabelised / non-stabelised comparison, an aerial view with the Gimbal and my final thoughts :)

[chrismillersrcfamily]

Hey Dutch.. :) that's the same gimbal I have on my TBS discovery. Works great now (I had a bug in the first board). But after that awesome. Gimbal for what you want to do with it..

[BudgetGuyrc]

nice looking gimbal dutch have fun RCing

[blackmennewstyle]

I have the original gimbal they cloned for making this one on my TBS Discovery, for the price it works pretty nicely when you managed to find the good PIDs but my only regret with 2 axis gimbals is that you have to tune your YAW axis on your multirotors like a Nuclear power plant otherwise you will have the same effect like in your footages lol
4:32 Don't forget to put the pipes back at its original place otherwise you will have some serious water leaks over there LOL
Thanks for sharing and have a great week

[DiscoverRC]

Not too bad for the cost-thumbs up my friend.

[snaprollinpitts]

thanks Dutch thumbs up and a sub from me mike

[Markchance]

can i just use that 2s lipo battery, i wanna install this on my syma x8c but i dont really have an idea how to power it up

[HeliMouse]

Hey Roeland, got the same one cool man, it runs also on 4s and you can change the settings with bcg software free down load

Your shaking problems can be solved by playing with the PID values. The handheld movement is even more worse than on the unstabilized mobius. The roll axis over-reacts.  I think this can be removed by adjusting the D value. I hope, this helps.

[revparsonstl]

hi mate need some help gimbal works fine but if i plug the wire into the naza it start to move and point straight up

[eyeproduction]

Doet die gimbal het ook goed onder een drone?

[mrtuner]

Great video! I would like to get this for my tarantula. But how much does this gimbal weight?

[gavo]

Hi I was wondering if you could post the dimensions of the base plate. I wish to make a mounting bracket for my drone. Thanks

[AldeiaCriativaCinevideo]

What is the configuration and battery reference. Grateful

[myrctribe]

At that price you nearly cant go wrong. Ideal for putting on the end of a stick or for a first gimbal to fly with.

[MANOSRC]

very nice review my friend, thumbs up!!!
it works prety well, you think you can eliminate the small shakes that occured in sudden wind gusts?....fix that and you'll have perfect stabilized image!!!

[rizky_maison]

Hello, the battery is 2s 7, 4v? or? the recomendation is 11, 1v 3s right? anyway thanks for great tutorial :)

[cameronk]

what happened is i was plugging in a joystick controller and i plug in the wrong wire while it was wired and it now gives me the red light is there anything i can do to fix this?

[mikesrccorner]

looks pretty stable to me. i checked BG and read some reviews there's some people with vibration issue complaints so i watched your video and i didn't notice anything like that. looks like a pretty good item for a good price point. Do you plan to run this off the main lipo for the quad or you going to connect it to it's own small lipo?

[francoisBonin-phils]

As i can see, there is a little shift in roll along the flight, i have this problem, when changing heading(yaw), can't it be solved, with some adjustements or calibration?