How To Replace A Mobile Home Furnace. -Step By Step-

For a low price of $200, you will get assistance from myself when it comes to your hvac needs, whether it's sizing, diagnosing, or locating the correct equipment.

Here Is Where I Order All My Air Filters:

Follow us for more diy hvac tips & to enter for our giveaways!

Instagram: @diy_hvac_guy

⚠️ Disclaimer:
This video is for educational purposes. Any and all HVAC repair work is done at your own risk. Any person attempting to deal with any type of refrigerant MUST have their EPA 608 certificate. The DIY HVAC Guy channel is not responsible for any possible damages or injuries caused by the use or misuse of the provided information.

[kronosert]

I needed this video. We just bought an old mobile home on some property. The furnace is garbage and way way old. I have done residential but not any on mobile homes. This saved me a ton of headache

[deltafour]

What a godsend! This is exactly what I was looking for, on how to remove and replace a mobile home counter flow. THANK YOU!

[lillianad]

Yes I have a double wide would like to see a new installation of an electric furnace only

[jttaylor]

Thank you very much you did make it look very easy and most of all thank you for not playing music drowning your voice out Good job.

[sandyzee]

I have one just like this model in my mobile home that was replaced a few years ago. It would be great if you could do a video on how to clean and maintain it since the layout is so different from your video on a normal gas furnace. Also, since the switch is on the inside at the top of the component box, a video on how to pigtail that switch to run on an inverter/solar generator, would be so helpful!

[slickmartines]

Thanks for the video very helpful. Ho do I go about checking the gas pressure with the monometer? Gracias.

[hardymichael]

Great job and amazing on YouTube video

[countysecession]

I just bought 18 mobile homes in Texas so I'm grateful for these videos.

[jimbola]

wow, I have that issue with mine it is so loud I can barely hear the TV so if I lower the fan speed it should help? thank you man you are a godsend.

[manuelbustillos]

The old furnace you removed was a Coleman DGAT most of those were part of a massive recall. I have removed some of those with a hole in the heat exchanger the size of a quarter typically on the back right side of the heat exchanger. It is best practice to replace the roof-Jack, you are replacing a Coleman for a Interterm those roof jacks are not the same. In my area you won’t be eligible for a warranty unless the roof Jack is purchased with the furnace. In my experience you end up taking the sawzall to those because the inner flue is almost always stuck to the top of the furnace.

[SteelyTheVan]

Thanks for this excellent video. I’ve replaced my unit with a new DGAX Coleman single stage down flow unit (nearly identical to yours) but the fan speed on the heater is way too high and super loud. I don’t have the jumper setup like you have to adjust the fan speed, I have a slightly newer model that doesn’t allow for moving the wire to adjust fan speed. I’m wondering if you have installed a newer unit and if so how did you adjust the heat fan speed?

[totechs]

What happens if the blower motor is pushing to much cfm during the heating season and cooling season. I thought you want high cfm 1500 to have better filters for allergies.

[tonibailey]

Exactly what size wire do I use to run from the breaker box to a electric furnace. It is heat only.

[everythinghomerepair]

Nice job dealing with that tight space. Wow aluminum wiring going to the furnace. Must be a 1970s mobile home. You have to make those wire nut connections well or they will melt.

[Jaystuff]

When you have black pipe gas line is it possible to loosen the fitting under the trailer house without holding back on the fitting? Do I need to hold back on the pipe under the tailer house well losing the fitting?

[BoomItsCharlie]

Hey man, first off I LOVE your content. You were one of the easiest to follow when looking up the problem I’m having. So thank you for making these videos. I’m slowing watching them all! I’m having a problem with my drain line on the AC unit, and the contractor told me to installs cleanout tee but I don’t have much space to replace it. Thoughts?

[jonbanta]

I just installed this same furnace. I have a question for you . Inside my flame coming out of the burner is nice and blue . The surrounding flames inside combustion chamber are yellow . Is it safe to say it’s running correctly ? Air flow gas flow etc ?

[DaveSprayberrymonroemi]

I’m confused I just watched a video before this one stating all these reasons you said not to upgrade to a 95% efficiency furnace but at the end of this video you say checkout this video on how to replace a 95% furnace that you highly recommend it.

[nathankauffman]

What is pokie? Or whatever sealant you are referring to?

[anibaltz]

Hi, Do you know what is the right coil for that furnace and where I can find it?, I forget say the coil for the old one in the video .