JetDock vs EZ Dock

Showing the difference between Jet Dock and the new EZ Dock that I purchased.

[Marine-bncf]

Great video its good to see the comparison, I guess at some point the floating docks will need cleaning or barnacle scrapping below the water level

[laughsandwich]

I literally said “is that a dead frickin iguana”..and you said..yh that’s a dead iguana right there😂😂👌🏾

[bahamasking]

Nice review. I see Pros & Cons between both docks.

[davidschnaiderman]

How would you launch the PWC on the JetDock if you do not have a wall to push off of? I noticed that you did not have to push with your legs against the wall to launch the PWC on the EZ Dock. It is a shame that the configuration for the EZ Dock was not the same size as what you have for the JetDock. You would have had a much better comparison. If you will make your EZ Dock the same width and have space for two watercraft, you will increase the stability of what you have considerably. Launching from the EZ Dock seemed much more effortless than what you had to do with the JetDock.

[stephenwhite]

Now that you've had both for several years what do you like best? It seems like the one with slides and no rollers would really scratch up the bottom of the ski...maybe even cause gouging. Do you ever get big waves? I'm looking at these and trying to decide what's best when you have decent sized waves.

[nyinfamousk]

I FINALLY just building my jetdock that ive been piecing together all winter from random cubes for sale. I have mine setup in the exact configuration as yours, two rows up front, two rows on the sides and 3 down the middle . I love how much room it will have . I just have to launch it once I work out how I want to mount it to my main floating dock. BUT my question to you is, how important and necessary are those bunk tubes down the center. I couldnt find those anywhere and now im a little worried it might be a little tippy without them. My skis are FXHO's though so my hulls arent as deep of a V as your GP.

[austinsanders]

At a marina I almost went over that ez dock and almost busted the front end on my jet ski.

[katodik]

on the EZ dock the wheels not seems to roll we could ear plastic sliding noise... position of the wheels? does it marks the haul? quality control plastic ? china?

[katodik]

Whats with the pins '' holding '' the cubes beetween the 2 slide... one seems to come off!
and black color ? does it turn hot for barefeet..

[treydrier]

The EZ-Dock is nicer looking and you can get it in different sizes so this isn't an apples to apples comparison (size wise). Also you can get the EZ-Dock with cleats to tie it up. The Jet Dock is very nice with the built in winch. I just don't like the black color and I think it's the only color they make it in.

[chadberlean]

What's the price difference between the two?

[tanyabarnes]

EZ Dock is the way to go; the durability is amazing; on and off so easily, you don't have to go fast getting on them, a little bit of throttle to get on and the wheels turn and take you on board, you can add and extend and have 10 PWCs and much more. I love EZ dock it's definitely the way to go. You can see in your photo how easy it was to get on and off, and you can add a wench to the 2i as well, I would add that before a rope, you can also add some couplers on the back and sides and tie you PWC down in bad weather or just to secure it. It's not the EZ Dock attracting all that stuff in the water, it is made from Polyethylene, I do believe it's just there in that part of the water, that comment made no sense to me.

[sgreen]

Can you link to the replacement winches you buy for the Jetdock when they rust out? I can only find where they want to sell you the whole block.

[cmay]

I have a HydroHoist HP Extreme, Smokes both of these. Smooth on, smooth off. Looks sexy too.

[danconlan]

Thanks for posting this I’m in the market for a PWC floating dock and your review helps. What do you think about each of them now after having them both for a while?
Thanks,
DC

[JoeLitigator]

Are there supposed to be two rails per side and is it easy to swap out the winches without replacing the cube? I am looking at a used one that only has one rail per side and the winches need to be replaced. TY

[Rick_Sanchez_C_]

Good video.

These are great, but I don’t need a jet ski dock, I need a jet ski barge to pull behind a little 30 foot cabin cruiser….. the barge needs to be 10 and a half feet wide and have place to park two jet skis and be able to tie them down for a long trip….. I want to take my jet skis behind my cabin cruiser on a two year float around the Caribbean and maybe through the great loop……

Anyone know of anyone making anything like that???

[Peter-]

EZ dock wheels waffle the fiberglass on the jetski!

[kevinaalberts]

in that case I wonder how many PWC are junked because they dont how to care for them in salt water!! gotta be alot...!!

[RW-vtup]

Hi. On the jet dock are those low profile upside down cubes that you’re using in the middle lane?