ESP32 Based IoT Weather Station | How To Make | Complete Guide

____________________
Hi, in this video I will show you how to make a Weather Station using the very famous ESP32 with 3 sensors that can measure and display live values including:
1) Teperature
2) Humidity
3) Barometric Pressure
4) UV Index
5) IR Radiation
6) Visible Light

The parameters are displayed on the Blynk IoT platform both on the Web Dashboard as well the Phone App in the form of live values and charts. This can be a good project to get started with IoT. Hardware and connection part is easy. Code and setup part is just a bit lengthy so watch the video carefully till the end to make sure everything works.

Here's what you will need to build this project:
-ESP32 Development Board
-DHT11/21/22 Temperature & Humidity Sensor
-SI1145 Sunlight Sensor
-BMP180 Barometric Pressure Sensor
-Perfboard or Breadboard (to make connections)
-Male to Female Jumper Wires
-Grove Connector Cables (only if you're using grove sensors)
-Micro USB Cable
____________________
Don't forget to Like & Share the video. Subscribe to my channel for more awesome DIY!

Do leave a feedback in the comments section below. Any questions/suggestions are welcome.

Thanks for watching! :)

Tags:
#weatherstation #esp32 #internetofthings

[ccie]

Great job Saiyam.
As an Electricians engineer I spent 4-6 years building things from scratch. I appreciate you taking the time and effort to share this . My son is inspired to build this after watching your video.

Please keep up the good work. You have a great future ahead.. stay positive!!

[davidkavai]

You rock man! Killer project. Keep it up! This is real value added to the open IoT world. I hope you'll hear about these devices pop up in the future around the world.

[mohammedashraf]

Sir, we've been working on this project as per your instructions mentioned here but we're facing one issue, i.e the SI1145 Sunlight Sensor isn't available in the market and the ones available online seem to be different. Please guide me if I can use an alternative or if you know the same version of sunlight sensor mentioned here that I can order from any online sources (please provide) as per your knowledge.
We'll be really very thankful to you, Sir.

[SushantKumar-xrfc]

hey do you sell these hardware projects?

[sannithraomadhavaneni]

SI1145 is not available in the market! please help us with out that sensor

[rickff]

it is possible to add current sensor and tension sensor to make a solar weather station ?

[peteremachari]

Please give us the code you used to run your weather station see, it's not complete in your video

[major]

What are there dimensions for the board you used in the project ?

[Aseels-ydxo]

Can i use breadboard to connect esp 32?

[sanjaykece]

Can i get the code without sunlight sensor 🙂🙂

[thrayambikapandurangan]

Can I get a coding without for sunlight sensor sir please send me

[iamklevy]

im getting this in my serial monitor -> configsip: 0, SPIWP:0xee
clk_drv:0x00, q_drv:0x00, d_drv:0x00, cs0_drv:0x00, hd_drv:0x00, wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff0030, len:1344
load:0x40078000, len:13964
load:0x40080400, len:3600
entry 0x400805f0
Beginning Si1145! . that's it the shape doesn't show up what is the problem

[adityaagrawal]

Muje isme bina sunlight sensor ke karna hai
Please help

[sanjaykece]

Hello sir we made this project it gets failure pls explain the same by step by step sor pls pls

[chiragjagga]

i am unable to connect to blynk platform even after filling all the details correct (can anyone please help?)

[victorananth]

Can we create an alert if temperature drops below a value like 50 degrees fahrenhiet?

[woodfriends]

is it possible to develop the whole project with a free Blynk account?