Manually configuring an ethernet interface in Ubuntu Desktop

Long way of going about setting up an interface in Ubuntu Desktop - bonus includes some of the errors you see when you do this.

[macmillanhanry]

Dear Sir,

I have 2 network Interfaces eth0 and eth1 and need to configure static IP Addresses for both manually ... How to do it Sir?

One is eth0 for Our Organization which Range is 10.10.xx.xx other one eth1 for make some servers Range is 192.168.xx.xx

Taking above IP Addresses, How to configure them in /etc/network/interfaces?

Thanking you Sir,

Basavaraj From India.

[derik]

my network card is showing that it's ens33 so for the static ip change, I gave "auto ens 33" and gave the details like ip/netmask/gateway/nameserver /dns search land etc then I saved the details and do the restart but restarting was failed
it showing that "systermatical status networking.service and journalctl -xe " details failed please help me

[amirkazemi]

Hi Sith Lord Dan;

I have purchased an HP DL380 G5 off ebay. I sucessfully installed Ubuntu 14.04. I have a wired connection to my internet router. I set up manual vpn IPv4 connection using ip addresses I found using ipconfig on my laptop cmd line. I still cannot connect to the internet. what could be the issue? I have tested the wired connection on my laptop & it works.

[notoblogger]

thanks for the help, it sounds like you are teching a clas while screencasting. I have been having a problem finding a video tutorial about connecting an ethernet.

[LanceD]

man, you sound like Jeff Goldblum....

[chamilton]

I have a Intel i350 Gigabit card. I need to install drivers i am getting stuck at modpro command to install the drivers. extract the drivers to the folder.