WHAT ARE THE SYMPTOMS OF BAD WASTE GATE ACTUATOR ON A CAR

preview_player
Показать описание
WHAT ARE THE SYMPTOMS OF BAD WASTE GATE ACTUATOR ON A CAR

If you want to know what are the symptoms of bad waste gate actuator and what to expect if you have bad waste gate actuator and how a bad waste gate actuator can affect you car we will explain that in this video. We will explain the top symptoms of bad waste gate actuator and we will explain why you should fix bad waste gate actuator as soon as you can because causing more damage to your engine. Bad waste gate actuator is not very hard to detect and often you may get engine light and code for over boost or not enough boost if you have bad waste gate actuator. Hopefully the video will be helpful to any of you that need the symptoms of bad waste gate actuator on a car.



Our Most Popular Videos:

♦♦♦ Cameras & Gear Used For This Video ♦♦♦

•Cameras

•Tripod

•Microphone

•Light

•Computer for editting

♦♦♦ Other Equipment and Gear that I use ♦♦♦

•Camera


•Extra Computer For Editting


► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!


This is not a sponsored video. Everything is purchased by us!

The video is meant for entertainment purposes only. Do not Attempt!


AMAZON ASSOCIATES DISCLOSURE

*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
Рекомендации по теме
Комментарии
Автор

Products that we use and recommend:

AutoRepairGuys
Автор

My F30 was stuck in Limp mode due to this issue, I’m happy that this issue is finally going to be fixed

kjbugz
Автор

The most simple test is: Start your car when the engine is cold. You should hear a rattle noise close to the turbo and your RPM’s should be half RPM higher than your idle speed. After around 10 seconds (depends on the car) your RPM’s should go to the idle speed and the rattle noise is gone, that means that the gate is now closed and its functioning fine.

OptimusPerformante
Автор

Woah this helped me a lot solved literally my problem I’ve been having and breaking my head over my cats in limp mode and I checked and mines an electrical waste gate actualtor which the harness plugs into is broken resulting in needing to be fixed pluged into a harness and yes I’m over boosting at 32psi but limited to driving my car to only rev up to 3.5k rpm my car is manual and I try brining the rpm’s up at times and the engine bogs “limp mode kicking in “ reducing the performance of my car. Now that I know that will be the cause to my struggles I’m going to order a wastegate actuator right now thank you 🙏 nice video very informative and clear thank you

ants_got_yahat
Автор

Thank you… good learning experience ;)

oscarmaldonado
Автор

Hi. Would you please tell me the size of the hex nut that control the adjustment??
Thank you in advance!!

reuop
Автор

My Mercedes CLS is in LIMP mode and no engine management light on. Do you think this may be a turbo actuator fault ? Thank you!

just
Автор

If you have an electric wastegate could symptoms come and go I have a 2013 328i with the twin turbos, sometimes my car drives perfectly fine, and then out of no where switches into limp mode, autozones code reader said wastegate actuator

MrSkaterguy
Автор

At the beggining of this video there is a short clip of the exhaust of a car and you can hear the wastegate actuator triggering. Is this the sound a bad wastegate actuator would make or is this the sound of a properly functioning wastegate actuator? Any help would be greatly appreciated. thank you for your all your content. you do a great job and keep up the good work.

mikehaworth
Автор

I have very wierd problem my car run normally but i felt that the car is not giving me full of its power, then i tried to run it hard for around two minutes and the complete boost is there!!! Check live data of the long term fuel for both banks one of them is plus 7 before driving it hard! Then after driving it hard the car solve the issue by it self the long term fuel reading for both is 0, can you help me understand if this mean Pneumatic Wastegate Actuator for my n63tu has failed? Or the wastegate are the one? But how the wastegate is the car after long hard driving it solve its issue by it self, please help

hasanalothman
Автор

Got a P1290 code on my F10. Wastegate Solenoid that comes and goes. Getting a new actuator installed tomorrow. Had CE light and DT malfunction.

lesturner
Автор

If waste gate actuator rod has snapped with heat and age and it doesn’t work can that make car smoke white really bad I bodged it up with wire to get home and it stopped

GRANTNOMERCY
Автор

What if wastgate rattles at idle. Low boost

amadeusgonzalez
Автор

Does anyone have an idea why ( sometimes) if you kick my CRD C300 down or try and make a drag start, it goes into kangaroo mode bucking or jurcking up the road. Ideas, could it be the waist gate, actuator or some other other reason. Anyone else had this problem, or engineers know of this issue ?

normski
Автор

could this cause a P2261 code? "turbo bypass valve-mechanical" in my Elantra sport. I keep getting this code, but it's very intermittent... usually it doesn't even get past "pending". What could it be?

wrathofpaulii
visit shbcf.ru