Dspiae ES-P electric pen, portable, cordess, low speed 3mm grinder drill sander polisher tool esp

Very compact and easy to use tool for the scale modeler. Internet says can charge to 80% in 30 minutes and fully charged in 60 minutes. Uses mainstream Dremel style 3.0mm tool bits.
Internet also says 5000/10000/18000 RPM but highly doubt it based on how slow it cuts plastic at the highest speed.
#dspiae #esp #grinder

[peterturner]

Great tool but my existing drill bits and grinding bits did not fit the 3mm chuck. Solution is to purchase a 2mm shank chuck from ebay and I now have a drill that can take tools and drill bits from 0.3mm to 3.2mm.

[MrFish]

I just bought one with the 9 bit set and also sanding disks, I build plastic model kits and I think that is where this will shine, especially as a nice paint mixer. Plus the 3mm shank makes is compatible with a massive range of bits for polishing sanding etc.

[jonflanagin]

Just bought it and i love it, so far so good.

[arclementsjr]

I also own this tool and on the main box it says the rpm at setting 1 is 5000, setting 2 is 10000 and setting 3 is 18000.

[briansrcadventures]

It's a shame it doesn't take various sized collets which would mean you could more easily use various sized shanked bits.

[fantv]

Everyone must be aware that the USB-C Port of the DSPIAE is not compatible with "UsbC to UsbC" cables. It only works with "UsbA to UsbC" cables. Because of this design flow, people will most of the time not be able to use the same cable as the one they use on modern phones.

[PeteCourtier]

Love mine but it’s a shame it doesn’t take 3.25mm shank bits! Had to buy a separate Chuck.

[RaNmA]

The bit Set ist very usefull, i Like it. You can Drill holes with the needle bit, but i would Like to have a Drill Bit for it. But i found nothing that fits.
PCB Drill Bits are 3.175 and the Dspiae fits only 3mm Bits...
Thanks for the Video, regards from Germany

[jonnyz]

It's kinda like you're reviewing the bit, not the tool...

[Kenyjbv]

Can you please confirm? Are the white spots (Example @12:00) on the body of the pen came from the factory or just dust/plastic particle? Thanks man!

[joemoore]

Nice too, but you only limited to using DSPIAE bit and acessorie's. Very limited selection. You can get a chuck to use other bits but they do not run true and break very fine drills. It's basically a small compact grinder.

[tomcarrington]

Hi, thanks for the preview.. Where did you order the extra tools for it please? I have one and cannot find where to buy them. Thanks, Regards, Tom

[RaNmA]

Hi i have bought the 5mm sanding disk's and ITS make fun. You can sanding in small areas. Very usefull. It, s good to Sand Nub Marks down and get a smoth Finish.

But i have 1 Problem. My Pen Draw Batterie Status very fast. I charge It at 100% and don't use it for 2 weeks...and the Akku was at 0%...

It that normal? I try it 3 Times but every time the Same Problem...

[Edward-Plantagenet]

Any idea if this will take their tungsten drill bits. I suspect not.

[hernanrodriguez]

How long does the battery last fully charged?