HP Envy x360 boot to Bios and how to boot from USB | Acer Boot Menu | Lenovo ThinkPad |Dell Inspiron

HP Envy x360 boot to Bios and how to boot from USB | Acer Boot Menu | Lenovo ThinkPad |Dell Inspiron
#HpEnvyX360UsbBoot #AcerBootMenu #LenovoThinkPad @John Galiwango
how to use a pny 32gb flash drive on a thinkpad
HP Envy – boot from USB
The USB works very well with the HP Envy series of laptops. Often you will need to make a quick change to the BIOS settings to enable the ability to boot from USB.

Firstly, try to boot from USB, turn off your computer, plug in the USB, power on,Immediately press the Escape key repeatedly, about once every second, until the Startup Menu opens.3) Press F9 to open the Boot Device Options menu.
4) Use the up or down arrow key to select the USB drive, and then hit Enter .
If the HP Envy boots from the USB – you are good to go.
If there is no USB option available in the list of drives, then you will need to make a quick change to the boot options.
Follow these steps to disable Secure Boot in BIOS.
1.Use one of the following methods to open the Computer Setup Utility.
Turn on the computer and immediately press the F10 key repeatedly, about once every second, until the Computer Setup Utility opens.
Turn on the computer and immediately press the Escape key repeatedly, about once every second, until the Startup menu opens. Then press F10.
2. Use the right arrow key to choose the System Configuration menu, use the down arrow key to select Boot Options, and then pressEnter.
3.Use the down arrow key to select Secure Boot, press the Enter key, and then use the down arrow key to modify the setting to Disable.
4.The Computer Setup Utility closes and the computer restarts. When the computer has restarted, the Operating System Boot Mode Change screen displays, prompting you to confirm the Boot Options change. Type the code shown on the screen, and then press Enter to confirm the change.
5.Use the left arrow key to select the File menu, use the down arrow key to select Save Changes and Exit, and then press Enter to selectYes.
6.The Computer Setup Utility closes and the computer restarts.
When the computer has restarted, use the power button to turn the computer off.

[mikeybaughman]

Thanks friend! I would have been surprised when the USB option didn't pop up after reset!

[mariaelenafusceneco]

Thank you. Quick and straight to the point!

[sebuntuayingomajustin]

Thx Fam 🙏🙏💯 keep us updated sir .
GOE

[JaimeTorresY]

Thank You. Me ayudaste mucho, estimado amigo, muchos éxitos

[chifundokolombo]

This video really helps me, thanks alot Boss

[cultistpriest]

My hp envy 360 isnt reading my usb, my usb has the windows update in it. Any ideas?

[nova]

Bro, you just got me a hot date . LOL thanks.

[mthd]

Went through these instructions, and my USB drive is still not being read :( tested the drive in my main rig, to make sure it works. Any suggestions?