Dewalt Drywall Screw Gun DCF620B and Adapter DCF6201 review

HAVE AN URGENT HOME RENO QUESTION?

Dewalt Drywall Screw Gun DCF620B

Dewalt Drywall Screw Gun Adapter DCF6201

DeWalt DWA6PHC2-5 6" Phillips Replacement Bits

Get your tools faster!

Check out all the tools Brad loves to use:

#Dewalt #ScrewGun #HammerandHome

WANT TO GET MORE VIEWS FOR YOUR OWN CHANNEL?
If you're a YouTube creator and you want to take your channel to the next level, check it out:

DEWALT brushless motor that delivers superior performance and maximum run time
Li-Ion battery with fuel gauge provide 33-Percent more capacity over standard packs
Cone-Lock(tm) nosecone locks on securely and is easily removed
ergonomically designed for less worker fatigue
LED light for visibility in tight spaces
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

DISCLAIMER: This video and description contains affiliate link(s), which means that if you purchase via one of the product links, we’ll receive a small commission.

TOOLS CAN BE DANGEROUS, USE AT OWN RISK
Hammer & Home offers video for informational purposes only. Using tools can be dangerous, causing injuries including, but not limited to, cuts, injuries, burns and debris inhalation. You assume all responsibility and risk for the use of the information and resources available on or through this web page and video. Hammer and Home does not assume any liability for the materials, information and opinions provided on, or available through, this web page. Hammer and Home disclaims any liability for injury, death or damages resulting from the use thereof.

[hammerandhome]

{This is our affiliate link. If you make a purchase, we will earn a small commission, at no extra cost to you.}

[sixdsix]

Sure a drywall gun with belt attachment may cost a pretty penny for a specialized tool, but if you have to drywall even a few rooms, the speed and accuracy will likely pay for itself. Also, you could also sell the tool afterward making it cheaper than renting one and not have to worry about rushing a job.

[Harley]

Just ordered the whole kit with the cutout tool and the attachment. Be using it on my laundry room remodel next week. It will be a great tool in the adventure of remodeling my entire house. Great video thank you sir.

[experimentmodification]

I bought the same screwdriver like this. Everything is ok, there is only one mistake. The switch for left and right should not be close to the finger, because when I press the switch, the direction lever also moves. That pi should be above the switch.

[JamesofJesus]

I might have said this earlier. If you up the battery to 3am, you can push the switch under trigger to be power always on. Good for when your finger want a break.. I got a rash from the triggers and then taped my finger. Without the loader the button really helps. Just don't miss! Lol. Also a FYI, works wonder on fence screwing and odd jobs. The impact is stupid strong, so make sure your straight on or your gonna burn a bit. Push it in without the loaded and twist to side on rev to take one's you want out.. So many tricks on commercial with this.. They don't always spend the extra on collated.

[pawekowalik]

I use same tool is great one of the best I own. Only one downside. With a longer screws 45mm and longer sometimes screws don't want to screw in straight.

[rambo]

good gun, good demo, we have several sites shutdown, cost of materials has made for shortages and 40 houses locally sit unfinished thanks Joe the union breaker

[robhersey]

The collated screws are more expensive, but I pin the sheets using these and finish up with regular screws to save a few bucks.

[michaelc]

Hi Brad,

Yes, this is a great tool to have in your tool box. Can't wait to see which company will make a cordless cement board cutter.

Thanks for the video

[waynerobinson]

Love how all your tools look unused 😀👍 which mine looked the same

[jamesD]

Great review. I ordered the gun bare tool as was $70 off the $199 Canadian price..next up will be the add on attachment. Thank you so much!

[bobseguin]

The grabber superdrive n7, fits dewalt, its lighter, less bulky, and a finer better into tight areas....

[calebgibbons]

Great video, I have this gun(DCF620) with the attachment (DCF6202). I am a fencer and I bought collated decking screws for this but I am having a hard time getting them to feed properly. I bought the Simpson Quick Drive #8x1-5/8 T-25 collated decking screws. Is the a better type of screw strips that I can order? Otherwise both the screw gun and the DCF6202 feeding attachment are useless to me. Thank you for your time and consideration!

[bryangrim]

This thing looks so cool it actually makes me want to hang some drywall, and I hate working on drywall. 😆 lol
That says a lot! Thanks for showing.

[cecillevisser]

This is so darn cool! Brad, you rock buddy! 🤪

[hnwmxdf]

YEAH RIGHT ITS SO MUCH HARDER EVERYONE THATS BEEN IN THIS GAME HAS BEEN LOOKING FOR A REAL EVEN MORE POWERFUL WAY TO USE SCREWS BUT THAT CAN GO THROUGH ANYTHING METAL WOOD AND USE ALL TYPES AS WILL.

[zzubuzz]

That guy reminds me of the chainsaw guy in Scarface, he should start off video with "say hello to my little friend".

[godsdisease]

Great demonstration! Very thorough! Great video!

[shawnermcgregor]

I am going to try this boarding fences as an alternative to a nail gun using deck screws from senco. Should be able to go nearly as fast and make a far superior end product!

[kdsesc]

Thanks for the review. What about the DCF6202 attachement. Just ordered one and will come only in march.