Pedreiro revela seu truque para emendar cano sem luva #tecnica #truques #pedreiro #dicas

[sadekbaker]

During the second alternativ the water was suddenly stoped. It is a magic.

[AnshumanPani]

During first try water was running but not during the second try😂😂😂

[fernandorocha]

Heat the end of the tube and then fit the other side inside it.

[MnKhan-nh]

Use this small piece outside the pipe..if u u fix it inside the pipe it will decrease the pressure of water...
Thanks to all for hundred likes...

[alexpuzanov]

1. Заужение диаметра приведет к снижению объема вытекающей воды. 2. В месте соединение будет постоянно засор.

[irajarapintochaves]

Gostei da idéia, eu costumava esquentar o cano, mas è bem difícil, assim conforme o vídeo é bem mais prático.

[stonyman]

Never underestimate the power of glue. Although it never works for me!

[romanoschwabel]

what kind of joke it this
first water runs and when fixing right no water. you may do this with water running 😄

[DiyHandyTips]

So simple yet incredibly useful! Thank you for sharing!

[ceengenharia]

Funciona, desde que o tubo não passe água nunca mais 😂

[CreationHolicX]

This is a fantastic and highly useful idea for every plumber. Thank you so much for sharing this video!

[KazutoKirigaya-pw]

Tinggal panasin ujungnya, terus masukin. Jangan lupa kasih lem. Kelar

[JaySahu-uxxy]

I just want to confess my feelings ....
The idea of creator is amazing ...but he knows that if I uploaded this video normally he will get a limited amount of views by normally I mean to say stopping the water in both conditions...😅😅 But he actually stopped the water in second condition so that people can make some fun about that topic and this video get some more reach....
Damn i am smart 🤓🤓

[renatoaraujo]

Engraçado que parou de vazar água do nada hein. E se eu não conseguir fazer essa mágica???😂😂😂

[syedibbu]

At the beginning he purposely use wrong tricks just show off his trick is awesome

[Astin]

물을 막은 것도 문제지만 내부 파이프 조각이 제대로 고정되지 않은 것 같습니다 본드에 의해서 오염되는건 둘째고요

[yibra_malik]

I love it, thank you, why I never thinking about it before,

[senjaofficialchanel]

You just heat the PVC pipe on the other side with a heater, after it softens a bit, insert it and pull it back, add PVC glue and then insert it again, you're done.

[deci]

that would reduce the flow rate of the pipe, causing issues in normal cases, increase pressure if it's a pressurized system, and create a place for standing water to corrode the pipe from the inside in low flow cases.

join it from the outside, not inside...

[muamerblazevic]

It's plastic you can heat it up on a hot rod make it wider and just connect and let it cool down and become solid again