How to Install a WarmlyYours LED Mirror

Показать описание

In this video, we'll show you how to install one of our LED mirrors with a hardwired connection. Our Tech Support Manager, Scott, demonstrates how to prep the installation area, make electrical connections, and mount the unit on the wall.

The Marquee Series of LED mirrors include Audrey (shown here), Ingrid, Marilyn & Judy.
This collection features LED strips underneath a frosted glass frame with a touch on/off button. With full bounce-back lighting and sleek modern designs, this collection is sure to help add some elegance to your morning routine.

Installation Instructions:

Start by unpacking the box and removing the four corner pads from the mirror.

On the back of the mirror are several mounting points - this unit can be mounted both horizontally or vertically. A mounting foot on the back of the unit helps adjust the mirror to sit flat against the wall.

The black box on the back of the mirror contains all the electrical components for a hardwired connection. Start by removing the screws and the cover from the black box. The "main in" sticker indicates where the connection will go. Using a jumper connection, connect the Line (L) and Neutral (N) wires where indicated with a screwdriver. After both wires are connected, secure them again with the clamp near the opening. Secure the lid of the black box once these steps are completed.

Next, decide on the orientation of the mirror. Measure the distance between the two mounting points and transfer them onto the wall. The mirror you receive may differ, so always take your own measurements before hanging. Find the center of the electrical opening, and center the mounting points on either side. Drill holes and insert anchors into the wall before installing mounting screws. Before you make your electrical connections to the wall, turn off the circuit breaker.

With the mirror face down, use the jumper wires to connect the power from the wall to the back of the unit. Install according to local electrical codes. Push wires back into the electrical hole as the mirror is mounted onto the wall. Turn the power back on and test the mirror with touch on/off button.

Call our 24/7 tech support team for installation support.
(800) 875 5285