Onshape Beginner Tutorial: Tips, Tricks & Practice! - Learn Onshape & Follow Along Example

*Thank you to Onshape for Sponsoring today's video!*

#Onshape #CAD #onshapetutorial

Join this channel to get access to perks:

Brandon here back with another new video!

In this weeks video we are taking a deeper dive into Onshape, the Browser-based online design software.

We will be working through a nice and easy example project while I highlight some of my favorite go to tips, tricks for those of us getting started with Onshape and looking to speed up our design process!

Oh and let me know what tip, trick or tutorial you'd like to see in the next one down below!

Cheers and thanks for watching

*Thank you to Onshape for Sponsoring today's video!*

[Cadintentions]

Thank you for watching and let me know what you'd like to see in the next one!

[jadenmansour]

I should not have taken engerneering 😭

[brianmaness]

Thanks a TON for this video. I have an on and off again intermediate autocad skillset. I just got a 3D printer and want to start some basic 3d design stuff for hobbies. I stumbled around Onshape for a couple hours thinking I’d pick up the interface/commands and got pretty discouraged. Following along with your coffee mug has got me jump started! Just what I needed to get a little muscle memory going.

[KYLEFUCKINGMILLER]

I love your pace in these videos its just slow enough that i can follow along in my other monitor. this level of editting is rare and i appreciate it

[reefrookies]

Easy pace, just enough info to get started. Thanks!

[scotterholm]

As far as I can understand, the handle is only connected to the mug at the tangent. How would you draw a real-life handle which is connected to the arc/curve of the mug?

[stripedcollar]

I have been a Solidworks designer for almost 20 years. I have several 3d printing related income streams but didn't want to tie up capital with a Sw license. Onshape gives me productive time to earn the $ to offset the cost before I buy. Thank you for your tutorial series. It has helped me transfer my design skills to the new platform. Im liking onshape more each time I use it.

[debop]

Thanks I needed this for school. Quick and Simple

[canadiansparky]

My first lesson and I followed along, wish I had two screens, fumbled along is probably more accurate. Somehow I moved my whole image to the right of the screen and I couldn't get the image to rotate by clicking on it until I figured out it was a right click and then drag it. This will be one of my first prints when I get my first machine on Monday, I followed along with adding the handle just for the knowledge, then removed it until I see how my machine does with over hangs. This lesson took me from zero knowledge on CAD to here, so as a 60 year old, Thanks very much.
Subscription added.

[EnjoyPlantPower]

Regarding the handle questions, it is true that when you zoom in the handle is only connected on the centre line, not the whole width of the handle. I approached it differently, keeping my cup body solid, ran the handle sweep from the centre line of the entire cup and then extruded the inside of the cup after the creation of the handle.

[eugenethygreat]

thank u so much i just joined a world champ robotics club and i need to be good at this for the sections of it that im joining

[BrettWareWoodWorks]

Thank you so much for this video! Down to your voice. Easy to watch and easy to listen to! I look forward to all of your videos.

[infiniteone]

Handle is not properly connected to the mug, cause attachment does not follow the form of the mug. it will not merge this way - anyway to fix that?

[livelygoats]

That is really clear thank you. Also so cool how the subscribe button went rainbow when you said subscribe 😆

[Mattay]

Very glad i found your video, it was super helpful and well presented. Used windows 3d builder and tinker cad to this point so this feels a little more to learn but so much easier to get shapes you want. Looking to design a boat once ive watched enough videos. Subbed.

[westmurphy]

Is the handle only tangent to the mug surface?

[carstenjensen]

Thanks a bunch - this is very helpful for someone starting into 3D printing

[TurboSol]

On the offset plane part, is there a way to click an area I want to set the new plane on the object without typing the dimensions? I can definitely see myself forgetting what they were and it seems easier just to click where it should be

[paul_devo]

Thanks for the video... wont the handle not be connected to the cup becauseyou drew the handle bases on a flat plane and the cup surface is a curve. How do you join these? thank you

[MrAlgefors]

Very simple and easy explained! I will view more videos!