2024 Toyota Tacoma Lift Kit Install (SR5, Sport)

preview_player
Показать описание
We hope this How To video helps you with installing the brand new Westcott Designs Lift Kit for the 2024 Tacoma SR5/Sport. This Lift kit is a 2.5" in the front and 3/4" in the rear. Please comment down below for any further questions regarding the install process.

More Westcott Videos:

FOLLOW US:

SHOP HERE:
Рекомендации по теме
Комментарии
Автор

For anyone with an off-road, for the strut part it twist off, so DO NOT hammer it. I used a crescent wrench and vice grips while heating it up and it comes right off. Your welcome.

ghostawaken
Автор

Nice! Great detail on installation process. Thanks for sharing.

hillrunner
Автор

Great video with one exception, prying the axle and control arm down is pre loading the rubber bushings. The final step should include loosening all rubber bushings pivot points, putting the vehicles weight on the tires, jounce suspension then tighten all bolts

Avtor
Автор

What is the difference on the install for the TRD OFF Road? I see this is list for the SR5/Sport. I have a OFF Road I’m about to tackle, any specific tricks on that vs what you have shown here??
Thanks

Ncserv
Автор

Using this kit with the 35s, hows the suspension flex? do you still get full flex without rubbing?

johnsantoro
Автор

Torque specs for everything that was disassembled?

Simply_Yager
Автор

After removing the plates behind the front wheels, what do you use to seal the bolt holes?

PatHall-wf
Автор

nice.. good clear instructions .. could we get a look at it from afar

kobz
Автор

Shouldn't you have upgraded the bump stop top plate while doing the shocks?

charlesjaeger
Автор

So I can run this preload on a sr5 and 35s will fit with a +25 offset? Or the 285/75/17?

dlowfromarco
Автор

And what do the CV angles look like with 2.5 inch lift? Are the bellows rubbing at ride height?

jackbauer
Автор

Just an fyi for anyone using this to run 35s. You will have to trim the front bumper, remove the front mud flaps and crash bracket.

tannerensign
Автор

This seems like itll stiffen the ride up a lot in the front.

themanthelegend
Автор

What is the function of that top rubber piece that slides over the top of the shock after removing the pressed on spacer?

jfridayify
Автор

Will the spacers make the suspension stiffer?

AA-dxql
Автор

I Had this installed on a offroad and I noticed vibrations while driving, it's almost like a hum. I notice it mostly when driving 30mph and faster. What could cause this? Do I need a differential drop? I know ICON makes one

fraziermedina
Автор

Where can I buy the kit for the 2024 Toyota Tacoma RS5?

mauriciovasquez
Автор

Have these kits been tested on multiple vehicles without needing an alignment? Can I just install it and not worry about even getting the alignment checked?

driftx
Автор

I’m trying to until the rock sliders I got today, one of the fittings for the bolts doesn’t fit. And there isn’t any instructions

martinrocha
Автор

Does taking off the crash bar have any affect on warranty ?

alericsoule