How to use a Dritz Quick Turn

#dritz

Use the Dritz Quick Turn for turning the wrong-side of fabric to the right-side in order to create bias tubing, purse straps, shoulder straps and more.

Place the cylinder in the fabric tube. With the round end of the corresponding rod, push fabric end into the cylinder while sliding fabric tube over cylinder. The 3/16 inch (0.47 cm) cylinder turns 3/8 inch to 5/8 inch (0.95 cm to 1.58 cm) fabric tubes. The 3/8 inch (0.95 cm) cylinder works for 3/4 inch to 1 inch (1.9 cm to 2.54 cm) fabric tubes, and the 1/2 inch (0.5 cm) cylinder accommodates 1 inch (2.54 cm) or larger fabric tubes. Pull on fabric end until entire tube comes out of the cylinder. The rod will remain in the fabric tube.

Use the rod to push out corners. If necessary, turn the rod around and use pointed end in corners. Remove rod when finished.
For opened end tubes, slide cylinder to about 1 inch from end of fabric tube. Fold fabric end over cylinder and continue with above instructions.

Find the video helpful? Go ahead and share it.

[rabbit]

I'm mad nobody told me about this when I needed it