BT05 HM-10 AT Command

Connecting Arduino to BT05 Bluetooth Low Energy (BLE).
BT05 is one of many compatible module of HM-10.
It has a liitle different AT-Command code from HM-10.

Voltage Sensor / Voltage Divider and the calculation formula :

INO file :

BT05 AT Command file :

If you have any question, please write in the comment column.

[ralphbooger]

Remember to select "both NL and CR" in the serial monitor...

[somsoe]

You don't need to be use 12k and 22k resistor. A 1k and 2k works just fine.
Also when using AT command you need to add a space after it to work. example "AT+NAME "

[hbasrii]

Thanks this is the most explanatory video on the whole internet

[ramink]

Thanks bro, your awesome, watched all the videos about this module on youtube but only yours worked :D

[harrisrendra]

hi everyone ... don't be fooled by the bluetooth board hm 10 BT 05 because in this video HM 10 BT05 is not shown from above and it makes me not sure that it is HM10 BT05 because the bottom is similar to HC05

[gustavomariani]

Hello, thank you very much for your video. Do you know if it is fully compatible with the HM10? because I bought a BT05 and it doesn't have several of the HM commands, and it doesn't see the Iphone. Also firmware update to work like HM10? thank you very much in advance .GM

[pecahretak]

disaya kenapa AT commant yg keluar bukan "ok" malah tanda tanya "<?>

[fkoca]

i accidentally change BT05 baudrate to 2400, only AT command work and give OK answer, other AT commands not work, what can I do?

[ancomurg]

How can I store in a string the response that the HM-10 sensor gives through AT commands? or not it is possible?

[memeindrianaputri]

min, saya ga dapet respon apa-apa dari AT command.. Tolong min ..

[bedbugbedbug]

instead of connecting to 5 VOLTAGE on arduino uno and making the voltage divider , can I connect to 3.3 voltage pin and no need to use any resistor ?

[ariasrp]

Idont get any response in Monitor Serial, am using NL CR, 9600 Baudios, (the module flash normaly, 500ms HIGH 500LOW indicating unconnected device), am using the BT05HM10 (clone one))

[random_idRI]

Punya sya ko ga bisa conect ke amdroid ya knpa ya mohon bnatuannya

[adimegan]

Hi... how to change name and pin..?
I tried but no avail..

HEEEELP
hice todo lo que esta en el vídeo y funciono, pero cuando cambie los baudios a 38400, ya no me apareció nunca mas los comandos AT

[hunterbakos]

did the exact thing and have not received any response to my AT commands

[alejandroalfonso]

The 33 people that didnt like this video are a bunch of haters

[misheldhiman]

Is their any HID firmware available for this?

[onbakulan]

Lebih cepat connect hm10 atau hc05 ke android kak

[jeffrysandypurnomo]

i accidentally change my baudrate to 3, means 19200, how to do AT command if this happen?