Using your Laser Temp gun Wrong?? - Fluke Fridays - Episode 22

[herbfellows]

Finally, someone who knows how to explain things. I'm not sure how much time and effort you put into what you were going to say, but it was fantastic! Clear and precise with no detritus, annoying music, or even worse, no speech at all. Well done.

[_BangDroid_]

Probably the best video on youtube on these things

[jaysmith]

Just got a Infrared thermometer. This video was great. Thanks for providing this info and you did a great job making it understandable.

[brightonmusic]

Thank you! Now I understand the Spot Ratio and how to apply it.

[unstepintime]

Not sure how I got here but glad I did. Thanks for the good review.

[alaskabornheathen]

I can’t say that I knew this info, I just picked up a Kobalt model and they make it pretty hard actually to use it wrong. It’s 12:1 spot ratio but it has a ring of lasers with one center bright one. Unfortunately the unit doesn’t come with a single shred of instructions so I came to YouTube to see if I could find a review and found this instead. Great video!
The Kobalt unit does have the ability to turn the lasers off so it can be more useful if you wanted to check someone’s temperature and not risk blinding them. I bought it to see temperature differences in my house and maintain flue temps in my stove.

[grandpied]

This is the way informative videos should be.

[UniversalEngineer]

Very helpful on how to use an IR effectively. This will help me to be more accurate. Thank you!

[MarcConroy]

Just got one of these, great video, thanks for your clear explanation!

[axxelwilson]

I needed this video, I got one and you really help me, thanks 🙏🏽

[SB-rxmc]

Really helpful all these explanations, Thx

[ChinhNguyen-ybcp]

This is very helpfull. Thank you very much❤

[KBC-]

How did you know I was going to watch this video on a Friday?

[lnj]

will an infared thermometer work on members mark stainless steel griddle

[mikec]

i want a better pyrometer for dabing. dabrite, terpometer. and terptimers are all junk and all over100-500$. diy it is i guess lol. thanks for this. maybe ill try the fluke first

[davidvickers]

Question, could you use one to shoot into a incubator and measure the temperature through the plastic without opening????

[GG-unwk]

Hello there, thank you for the info. Very helpful. I have one question. I got an IR from Mitchell MITMTN3 class ll laser. Distance : spot =8:1. I need it to measure the temp of the transmission panel while doing the flush and fill. So if I understood correctly, I have to be 8 inches away from the transmission panel to get the correct readings? Thank you for your help!

[larrytinnin]

Will This work to determine your sauna temperature

[denvergelilio]

Maybe not acurate tool for an AHU dumper?

[Usernamebutwhy]

my two points merge as i go further, why is that so?