Creality CR-6 MAX Unboxing & First Thoughts!

preview_player
Показать описание
The Creality CR-6 MAX is the (much) bigger brother to the CR-6 SE that was part of the record-breaking Kickstarter campaign. ECOstruder unboxes the CR-6 MAX with its huge 400 x 400 x 400mm build volume before it is available to buy. So will it live up to all of the crazy hype? Or is it just an oversized mess?

Are you in the Des Moines area? Come visit the shop!
HartSmart Products
9103 Swanson Blvd.
Clive, IA 50325

Follow ECOstruder on Social Media:
Рекомендации по теме
Комментарии
Автор

I appreciate you and your videos. It was your later video on the CR-6 Max that sealed the deal for me when deciding to get my own. I'm setting it up today!

bradleycasselman
Автор

Your tip about the loose screw check saved me from having to send the whole thing back. Thank you. During the auto bed level procedure, the Z axis test sounded like a box of rocks and it wasn’t moving. I went over the belts, any obstructions, nothing helped. I found that one screw was so bad it was wedging on the motor spindle, locking it in place. So, after tightening all of the screws it’s working. Subbed for that precious advice alone. Thanks.

christhen
Автор

I believe most touch screens have their own firmware. It's actually a good thing if you want to customize it independently of the main board.
Nice thing about the Creality Z support rods, you can buy them separately and put them relatively easily on other machines as long as they have about the same gantry height.

mururoa
Автор

Thassa big boi!!!
Looks awesome! I have been loving the heck out of my CR-6SE. No doubt the max provides an awesome printing experience, as well.

khalstead
Автор

hello, how to e-step calibration for cr-6 max?

pipelinesection
Автор

I just got mine and was worried how load the fan near the display are. Is that normal. Its really annoying and way above acceptable. Any thoughts about that?

ibanezgsr
Автор

PSA for Brandon. He sold me my CR 10 V3. It’s my first printer ever and he has been tremendously helpful and patient with a noob. Thanks dude for all your input!

Epic beard by the way. Does it have a name? Do you go to competitions?

CX
Автор

Is it neccessary to check the voltage setting on the MAX? ie 110v or 230v? Because I did not find a red button toggle between the two.

SilenceNate
Автор

You'd be surprised on how accurate those little switches are. I work on million dollar machines for a living and inside the siemens limit switches are very similar if not the same style mechanical switches.

There are no Y axis gantries. They are linear guides.

Shredxcam
Автор

Looking forward to seeing some test prints.

Imercor
Автор

Been trying to reach you, what is a good email I can use to contact you with a few questions?

TransTurbine