CFD Tutorial #16 : Gas-Liquid Multiphase Flow Simulation: Bubble Column Part - II (with Audio)

This tutorial demonstrates how to do the following:

Set up a transient bubble column

Use the Eulerian multiphase model

Solve the problem using appropriate solver

Postprocess the resulting data

A 2D rectangular geometry (of 0.1 x 1 m2) is modeled as a bubble column. A sparger at the bottom edge (of length 0.02 m) is created at the middle of the bottom edge.

Air with a superficial velocity of 0.01 m/s is introduced through a sparger at the bottom of the column. The details of the sparger are not modeled. Instead, it is treated as a uniform inlet surface with an area of 2e-4 m2. The air bubbles are assumed to have a mean diameter of 3 mm. The liquid in the column is water, and a degassing boundary condition is used at the outlet.
======================================================

Requirements:

Simulation Software: ANSYS 14.5
Video Editing tool: Final Cut Pro X (FCPX)

For More Details please visits:

More Details

======================================================

Tecplot Downloading Link :

Ansys 14.5 downloading Link:

=======================================================
CFD Tutorial #18 : Gas-Liquid Multiphase Flow Simulation: 3-D Bubble Column Part - IV (with Audio)

CFD Tutorial # 17: Gas-Liquid Multiphase Flow Simulation: Bubble Column Part - III (with Audio)

CFD Tutorial # 16: Gas-Liquid Multiphase Flow Simulation: Bubble Column Part - II (with Audio)

CFD Tutorial # 15: Gas-Liquid Multiphase Flow Simulation: Bubble Column Part - I (with Audio)

CFD Tutorial #14: Use of Loft and Sweep in Design Modular: Basic Tutorials

CFD Tutorial #13: Body Creation Using Revolve Feature in Design Modular: Basic Tutorials

CFD Tutorial #12: Body Creation Using Extrude Feature in Design Modular: Basic Tutorials

CFD Tutorial #11: Design Modular : Basic Tutorials

CFD Tutorial #10: Heat Transfer in 2-D Laminar Pipe Flow by Heating Wall - Part I

CFD Tutorial #9: How to use the custom drag model with #Fluent14.5 (with Audio)

CFD Tutorial # 6: Gas-Solid Fluidized Bed Simulation: Graphics and Contour Plots Using #Fluent14.5

CFD Tutorial # 5: Gas-Solid Fluidized Bed Simulation: Model Setup and Solution Using #Fluent14.5

CFD Tutorial # 4: Gas-Solid Fluidized Bed Simulation: Geometry & Meshing

CFD Tutorial #3 : Turbulent Flow in Pipe using 2-D Axis-symmetric Model in #AnsysFluent #CFDPost

CFD Tutorial #2 : Turbulent Flow in Pipe using 2-D Axis-symmetric Model in #AnsysFluent #CFDPost

CFD Tutorial # 1: Laminar Flow in a Pipe using 2-D axisymmetric model in #AnsysFluent #CFDPost