Mazda 3 & CX-30 (2019-2023)Rear E-Brake Disengagement & Maintenance Mode (For Rear Brake Change!)

preview_player
Показать описание
How to enter maintenance mode in order to disengage the e-brake to change your brakes and compress your caliper pisto
Рекомендации по теме
Комментарии
Автор

Attention! I made a mistake at 0:40 where i said to press on the gas pedal by accident. What i mean to say, is to press on the brake pedal all the way down till it stops. This process involves the brake pedal before and after service mode !

TheDNM
Автор

Your tutorial helped me immensely, thank you for posting 👍

iainian
Автор

Thank you so much for your guidance, your VDO really help me complete changing the front and rear brake pads CX30

daodouangkham
Автор

Excellent video with clear steps. Thanks for posting, made my day.

JP-kylp
Автор

I love my Mazda 3 turbo but one I thing I hate is the awful parking brake, the cable parking brake worked so good for so many decades now they came out with this garbage parking brake

hittrewweuy
Автор

2023 CX 50. Push the ignition button twice, not three times to undo.

TheCottonTop
Автор

Thank you very helpful! Good looking out this is my first Mazda . I have a 2021 Mazda 3 turbo hatchback.

nachomandetailingservices
Автор

Thanks soo much. After putting the vehicle into service mode, I unable to take it out of service mode. When I drive the vehicle dash board says parking brake applied and when I try to use the electronics parking brake it reads "switch operation not accepted". Sent it to the dealer but they are unable to solve the problem. I am from Ghana.

edemamenyo
Автор

I turned my maintenance mode on to replace my rear pads and rotors but accidentally turned it back on while disassembled. The caliper spit out the piston on the driver side. I also had compressed the piston using a regular tool instead of the suggested one, so you know if I’ll need to buy a whole caliper or if buying a piston + caliper repair kit will do? Trying to save on costs as much as possible. Rockauto currently does not have a caliper for 2021 mazda 3

wallydelarosagomez
Автор

Is it required to step on the brake pedal also, other videos I watched, though an older model, did not require stepping on the brake pedal ?

dartgts
Автор

Will I need to do this to change the brake pads on my M3 hatchback?

wallydelarosagomez
Автор

What if I did not put in maintenance mode and changed the rear brakes ? No issues have came up on the dash and it brakes just fine

bgukfrv
Автор

Mine will not come out of maintenance mode, followed the instructions and the brake wound off fine, will not wind back on, brake caution is flashing all the time

Tonyncher
Автор

Do you know a way how to re-engage the electric parking brake after doing maintenance to the rear brakes

TerraziUtopia
Автор

do i need to leave the car on auxillary mode to stay in maintenence mode when I work on the brakes? or can i shut it off?

Evansmustard
Автор

I can't get the e brake to work again

Cole
Автор

Is this the same for Automatic and Standard and AWD

mossycreekvids
Автор

Don’t push on the brake! It will cause the car to turn on when performing your process.

sebastianramos