Ntools 4000 B Spray Gun Unboxing & Physical Comparison To Sata 4400B

My ramblings on the Chinese Ntools 4000B spray gun, hope you enjoy the video 😀

Where I purchased the gun from,

Coupon code is PETESHOBBIES for 7% off the eBay price, offer is untill end of September 2023, good luck 👍

Please Subscribe To My YouTube channel, link below

My Top 12 Mini Spray Guns Video,

Comparing different clear coats;

Follow on Instagram,

Music: Shanhai
Musician: FOREVERT

All my videos are made for entertainment only. The views expressed are my own, and should you choose to follow them, you do so at your own risk.
Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer,  viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets, ensuring you are familiar with all this information will help with safe use of equipment and products.

Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations.
Thanks for watching

[BryanMiranda]

Hey pete, not sure if you mentioned it jn the video but you said you were surprised by the size of the hun compared to the 4400b but thats because the clone is a knoc off of the 4000B which was a full size gun between the 3000B and 5000B, it just wasn't successful because it was more expensive than the 3000B while spraying worse to many people, the 5000B reversed a lot of the issues people had with the 4000B while refining the 3000B's atomization

[davidray]

Can't wait for the comparison video.👍I'd also like a comparison of the 4400 vs meiji finer core🤞🤞

[edinhobr]

I'm from Brazil and watching your videos I decided on this gun, I was going from the GTI to the Chinese one, even in another video I asked about the recommended cheap Chinese gun for those who are starting out in the automotive painting garage, I'm going to buy this one from your link to make sure it's the same one because We notice that in China everything is very similar and different at the same time... I bought a 15 foot, 3 hp, 100 liter air compressor, will it be enough for this gun?

[Realism]

I'd like to see the NTools gun with the mini digital regulator on the gun like the DV1, the regulator can be bought as an addon

[MarcBchannel]

Great vid Pete! How's the nt4000 compare to the nt/nve?

[edinhobr]

Mine arrived yesterday, I bought it through your link. I bought a 5/16 hose that will work for it. I'm going to paint my car with pu share paint Willians that maximum and minimum psi in the gun is real. How many psi do you use?

[polo-]

Love the reviews, also would like to see how the Avalon wls 400 does, looks to be of good quality as well

[stuartsmalley]

Pete your comparing against the mini jet and not the sata 4000 which would be the same size gun

[ricky]

Hi, I have a 100L 13CFM compressor will that be okay with this gun?

[MassiDeVita]

Hi Pete! Great comparison between these two spray guns! Do you have the opportunity to try and make a comparison (also in terms of robustness) between the Ntools Mini 888 and the Auarita MP-102? It would be interesting to see how they spray with the 1.0mm or 1.2mm tip. I hope you can test them and let us know. Cheers!

[edinhobr]

Another question I'm having a problem with a fish eye crater in the paint I clean the piece well I have an air filter in the line and I still have a filter under the spray gun, even so when I use it wet lacquering to remove the shine these holes occur in the paint, any tips. and thank you for sharing your knowledge

[Dan_druft]

What about getting tips and nozzles when it goes wrong or wears out like on other guns or do you just throw it away?

[MADEbyDANSHINO]

Hi Pete
Watching your videos for a while 👌🏻it seems to be a really nice made gun . Waiting for the test video and see how it works. I was just thinking about buying the NVE gun, but I’ll wait for that 4000b test video😅 I’d like to know what you go for, NVE or 4000b☺️

[iraklimchedlishvili-dbmc]

Hi Pete! what is better ntools 4000b or Auarita L898?

[davidparker]

Hi Pete. I was wondering if you have changed your opinion on the Sata 4400 minijet from your original review several years ago. Do you still prefer the SRI & LPH80 over the 4400?

I have been thinking about buying a 4400 but I don't know if i should wait for the next version to buy. I already have a few mini guns but I see conflicting reviews on the 4400.... some say nothing else comes close to it while others say it is overrated.

[deanbrown]

Sat by the pool in sunny spain watching this, cant get much better 😅😅😅😅😅

[LSturboguy]

I'm a tradesman auto refinisher fancy name for a auto spray painter, started when I was 15 I'm now 64 so I've painted more cars than I've had hot dinners used most guns, I'm a bit of an Iwata guy 1 gun I purchase it at 15 and I used it only yesterday, the Black gun is spraying to heavy on the bottom and would be easy for it to build up and run with some 2k clears if you didn't expect it, I wouldn't recommend it for top coat be ok for a base coat and primer. I've been watching a few reviews lately on cheaper guns as most home painting guys don't need to spend $1000+ for a gun I've seen some Good reviews by professional spray painters 1 I seen was $15 and sprayed a beautiful top coat as Good as anything

[larropowell]

Hello again Pete. So the Ntools or the AEROPRO A610 with different needles and tips included Hmm.

[eduardopintorprofissional]

Ola, tenho um compressor de 10pes e 100 litro qual a melhor pistola da Ntools me recomenda ?

[rogeliogamboa]

Sir, I have a 5.2 CFM compressor and planning to buy a low CFM mini gun with a 1.2 tip - will this spray 2k polyurethane base coat/clear coat ?