RAMPs v1.4 To 24V

Показать описание

Converting a RAMPs v1.4 to run on 24v instead of 12v. Make sure you have fuses in line or correct poly-fuses. Using a Taurino Power Board eliminates the need to remove the D1 diode due to the fact that it can handle over 24v.

**CAUTION: everything that used to provide 12v on this board will now be 24v, including fan pins

Tony Gomes

Рекомендации по теме

Комментарии

Very good explanation! Recently I bought a ramps board and I realized that the F1 pollyfuse is broken... it has a crack on it... Do you think I could still use this board?

lourencequeiroz

Good video!
I have a question regarding the fuses, I am swithing to 24 volt and would like to replace that fuse with a standard auto fuse so how many amps should the fuse be?

PSNplayer

Has this proven to be a reliable setup? how long have you had it running now? I am looking to setup a Ramps 1.4 with 8825 stepsticks and want to use 24v bed and tip. I am familiar with Marlin 1.1.x so this looks like a great way to go.

daleerickson

I don't think the 16 on the fuse is the voltage because on the board that came with my printer there was also a fuse with the number 16 on it but the board was rated for 24 volts and it worked fine at 24 volts

BrianBrocken

What do I need to have to convert my Anet A8 to 24 volts, heated bed, hot end fans? power supply? I have a Ramps 1.6 kit with 5, 17 nema motors

kukulcangod

which poly board you remove? small one or big one?

Shfl

hello, do i need to change the drivers curent in half for 24v? Or just leave it as it?

mickredfox

I've been looking for a way to determine if the polyswitch is in fact 16v or 24v. Ive googled and had no luck or anythissng of the sort. How do you tell? It is a 1.4 version board so I assume most of them would all be 16 volts?

rodney

LOL, I heard the Simpsons on in the background.

thebeststooge

Instead of doing it like this, am i right in saying that I can connect the 12V source to X4-3 and X4-4.. and then connect the 24V source to X4-1 and X4-2 (for the heated bed) and ensuring the MFR1100 poly fuse is rated higher than 24V, and then I only remove LED2 or R23, and ensure the Q3 mosfet is sufficiently rated?

Thus, unfortunately I will run 2 power sources.. but it will run the 12V components with 12V, and the heated bed with 24V.

Is this correct? I want to try do this modification tomorrow :)

eduansnyman

I'm new to this so quick question so if I leave the diode in the ramps I do not need to supply separate power to the mega board correct and yes I'm leaving it at 12 volts thanks for any help

owenaero

any issues with the fan output for hotend or other fans?

pkarza

RAMPs v1.4 To 24V

RAMPs v1.4 To 24V

💾3D Printer / CNC Motor Driver RAMPS 1.4 Upgrade 12V to 24V 📇Good Printing Speed with Quality

RAMPs v1.4 from 12v to 24v

RAMPs running at 24v Stand alone

Converting RAMPS to 24V

Definitive (hopefully) RAMPS 24v mod information and how to guide

RAMPS 1.4 on 24V by replacing voltage regulator on the Arduino MEGA

Honest review: The RAMPS board

TL-smoothers in RAMPS at 24v experiments

SMPS 24v → Stepdown 12v RAMPS 1.4 Board Test - 001

RAMPS 1.4 11A+ 12V 24V DUAL SMPS TEST Part 4 20℃~100℃ TIME CHECK

3D Printer moving at maximum speed on Ramps 1.4 and 24v power

SMPS 24v → Stepdown 12v RAMPS 1.4 Board Test - 002

5V 8 Channel Relay Module For Arduino from banggood.com

RAMPS 1.6 - Basics

RAMPS 1.4 11A+ 12V 24V DUAL SMPS TEST Part 1

How to Silence Your 3D Printer with 24v TMC2100 Drivers!

RAMPS 1.4 - Como deixa-la mais segura e usar com fontes de mais de 16v!

RAMPS 1.4 11A+ 12V 24V DUAL SMPS TEST Part 3

FOR SALE Creality Ender 3 Motherboard V1.1.4 Standard Version DC 24V

3D Printer Parts CR10 Hotend Extruder kit 12V/24V for Ender-3 CR10 Printer 1.75mm 0.4mm

Endstop LimitSwitch Step Motor & NEMA17 Working with Drive A4988

HyperCube Evolution #8 - RAMPS 24v mod + 'It's alive'

como usar duas fontes na impressora 3D, 24V e 12V