filmov
tv
SOLIDWORKS Plastics: Simulation Setup Guide
Показать описание
Learn how to setup a basic mold filling analysis using SOLIDWORKS Plastics 2021. In this video we will run the Flow or Fill portion of the molding cycle to predict the mold fill of a plastic bezel.
Note that the 2020 and 2021 versions of SOLIDWORKS Plastics received significant user interface enhancements. The process for older versions will be a similar workflow but with a substantially different user interface.
SOLIDWORKS Plastics Standard allows the prediction of common molding defects such as short shots / partial fills and knit lines / weld lines. It also enables quickly testing different variations of the geometry through configurations, testing different polymers, and predicting performance of different gate or injection locations and clamp tonnage required.
Presented by Ryan Navarro
0:00 Introduction
0:35 Preparing model for analysis
0:59 Loading SOLIDWORKS Plastics Add-in
1:40 Creating a new Study
2:17 Specifying a Polymer
4:00 Setting an Injection Location (Gate Location)
4:30 Optional: Specify Clamp Force Direction
5:00 Creating a Mesh
6:15 Run Flow (Fill) analysis.
7:34 Interpreting Results
10:25 Duplicate Study - Testing a Variation
11:05 Learning resources
Note that the 2020 and 2021 versions of SOLIDWORKS Plastics received significant user interface enhancements. The process for older versions will be a similar workflow but with a substantially different user interface.
SOLIDWORKS Plastics Standard allows the prediction of common molding defects such as short shots / partial fills and knit lines / weld lines. It also enables quickly testing different variations of the geometry through configurations, testing different polymers, and predicting performance of different gate or injection locations and clamp tonnage required.
Presented by Ryan Navarro
0:00 Introduction
0:35 Preparing model for analysis
0:59 Loading SOLIDWORKS Plastics Add-in
1:40 Creating a new Study
2:17 Specifying a Polymer
4:00 Setting an Injection Location (Gate Location)
4:30 Optional: Specify Clamp Force Direction
5:00 Creating a Mesh
6:15 Run Flow (Fill) analysis.
7:34 Interpreting Results
10:25 Duplicate Study - Testing a Variation
11:05 Learning resources
0:12:16
SOLIDWORKS Plastics: Simulation Setup Guide
0:03:04
SOLIDWORKS 2022 - Plastics
0:03:33
SOLIDWORKS Plastics Premium
0:34:28
Solidworks Plastics Simulation Tutorial 1: Injection Molding Flow, Sink Marks, Shrinkage, Weld Lines
0:02:35
SOLIDWORKS Plastics Standard
0:09:42
SOLIDWORKS Plastics: Solid Mesh and Domain Specification for Overmolding
0:15:57
SOLIDWORKS Plastics Basic How to Use SOLIDWORKS Plastics Simulation
0:04:59
What's New SOLIDWORKS Plastics 2022 - Injection Location Advisor
0:48:44
How to optimize plastic parts for manufacturability using SOLIDWORKS Plastics
0:31:10
SOLIDWORKS Plastics - Virtual Injection Molding
0:02:39
INJECTION BOUNDARIES & CREATE MESH | SOLIDWORKS PLASTIC SIMULATION 2020
0:25:00
SOLIDWORKS Plastics: Exploring Injection Molding Results - Webinar
0:01:59
The fundamentals of SOLIDWORKS Plastics
0:07:18
Plastic injection pressure analysis in Solidworks | Plastic simulation in solidworks
0:00:51
SolidWorks Plastic Simulation
0:04:55
SOLIDWORKS Plastics Demo | SOLIDWORKS Plastics Overview/ Tutorials | -1
0:27:31
Introduction to SOLIDWORKS Plastics Simulation [Webcast 2019]
1:00:20
SOLIDWORKS Plastics Webinar Video
0:38:21
SOLIDWORKS Plastics - What you Need to Know about Injection Molding
0:02:11
Injection Moulding | Solidworks Plastics | Comparing Runner Layout Cavity
0:09:04
Plastic flow simulation in solidworks.
0:44:16
SOLIDWORKS Plastics - Professional, Premium, Advanced
0:00:29
SOLIDWORKS Plastics - Mold Flow Animation
0:41:14
Taking the Stress out of Injection Molded Parts with SOLIDWORKS Simulation and SOLIDWORKS Plastics
Комментарии