Free Energy Motor Generator Joules

A method in measuring power efficiency through the use of Joules stored in an input and output capacitor. 380% efficiency has been measured. A Joule is equal to one watt second, so this is just as good as a wattage measurement and correlates identically.

Both measurements were taken within the exact same window of time.

Here I show a method of circumventing the Lenz's Law opposing fields that normally work against the rotor to slow it down and kill all overunity effects.

The Lenz's Law is the FEED BACK MECHANISM of drawing current from a generator coil. This can be worked around with coil shorting or switch shorting.

Switch shorting is just briefly shorting the generator coil when the rotor magnet is just before the center of the core or right after the core, when it's generating the peak negative, positive or both voltage of the sine wave.

These shorts have to be very quick in order to have a very small pulse width. When timed just right a major voltage can be produced that has more power than what the generator is normally capable of producing without much drag or any loading down at all on the rotor. Peace.

[acidbyte]

you measuring voltage.
electrons are easy to obtain.
try closing the loop and putting the charge on the small cap to the big cap.
it will run out eventually.

[harryhasler]

I like your vids a lot. You may try some sort of flipflop switch to uncharge the output cap to a battery or resistive load while unconnected to the coil for a brief moment. Also, did you post the schematic for the 555 thingie? Maybe a Triac or simiar would be better than Transistors. Reeds burn out (that being said, who knows if that plasma is responsible for the gain, ala Teslas abruptly interrupted arks). Or, how bout them 19th century mechanical oscillators still found in door bells and tattoo guns. Looking forward to seeing more of your work, cheers.

[DarioDentes]

Did you calculate the mechanical stored enegy?

[oudotcom]

You really have to calculate in the starting energy used up to get it to the running speed and that is much more...only if you could close the loop and it will selfrun then you would have achieved overunity...