Logitech G PRO X Superlight Teardown | HOW-TO Ep. 1

Показать описание

A short and straightforward tutorial showing how to take apart the new Logitech G PRO X Superlight gaming mouse. The tools I used are listed below through Amazon Affiliate links.

---

SOCIALS & CONTACT:

Follow me to stay up to date on what I’m working on next, or to see what projects I’m working on currently! 👇👇👇

Рекомендации по теме

Комментарии

you absolute legend, 2 years later; i was having issues with my scroll wheel and noticed there was some dirt caught on one of the wheels sensors, used this video to disassemble and reassemble the mouse and now the scroll wheel is fixed. Thank you my friend!

spitsnare

Mine came with a loose battery, thanks for the vid.

CompactDisk-

If you read this you saved me buying a new mouse. After washing the surface my scroll wheel stopped working but just needed a good clean

faded_taco

I'm still amazed at how this mouse is engineered. 60 grams AND wireless without hole is a great achievement, but still has some minor flaws. Thanks for the vid, big guy 😊

demometalico

spilled coffe on my mouse this morning and it was bugging. thanks to your video i was able to open it up and clean the mouse from inside :) thank you a lot! Mouse works flawlessly now! even the Mousewheel started working again :D

MeteWayne

Used this guide to replace the mouse switches- turns out you don't need to fully disassemble it to do that, just taking it apart and prodding the battery out is enough to get at all the screws you need.
Thank you so much for the guide! solder wick and low melt solder worked perfectly for desoldering the mouse switches as well.

Appri

Thanks for this video, had issues with the scroll wheel being buggy and found a post on reddit saying to spray lube into the scroll mechanism. Followed this to open it up and sure enough, it's fixed. Thank you for such a no bs quick and easy to follow video. Just saved me a massive headache. Didn't find the screws under the battery.

Rentani

Spilled coffee all over my table by accident. G Pro stopped working shortly after. This video helped me get it open and with a little rubbing alcohol and q tips, the mouse is brand new!

astrocud

The hard part is putting it all back together, I’m lost rn

Mattt

Very helpful, thank you! I wanted to clean all my mousewheel because it was scrolling in the wrong direction unexpectedly.

emily_boop

Can I reconnect the surfaces that you first removed? Or I need to buy new ones?

rabiehkadi

subbed, since there isn't a good channel do teardown videos as good as clean as quick as this one.

also good to see they keep using that little spring to eliminate some pre-travel and stable the clicks (they call it the mechanical click)

EnnTomi

Why would the screws be underneath the glides? Now I need to ruin my glass skates just to open it...

starscream

for those of you who's mouse wheel is scrolling the wrong way. i didn't want to take the skates off because they're too malleable would only last 1-2 cycles of disassembly, so i dumped the highest percentage isopropyl alcohol into the frame, shook it around, mashed and scrolled the wheel in the process, and dried it out with compressed air. fixed the issue without the need for disassembly

crustate