What I Wish I Knew About Pulsar Turbos *GTX3582r Gen 2*

#PulsarTurboSystems #GTX3582r

This video is my machinist and car enthusiast review of the Pulsar GTX3582r Gen II dual ceramic ball bearing turbo. These are sometimes referred to as an eBay turbo since they are affordable and sold on eBay. Pulsar Turbo Systems is a high quality affordable turbo for the average car enthusiast! Don’t believe me!? Check out the video even though it’s a long one. I plan on putting this turbo on my F20b / H22 5th Gen Prelude and seeing how she does!

Affiliate link:

Music by: Joakim Karud - Classic

[jimhiscott]

I was really hoping you were going to take off the cold side housing so I could see if Pulsar had installed the very important large o-ring that seals it against the back plate. Is that o-ring there and in place? Please let me know. Thank you

[thestateofreal]

To clarify: The turbine housing inlet has an ID of 2.5” the OD of that flange is 3”

This is important to know as some aftermarket companies specify their v band flanges differently. Sometimes they are spec’ed from the ID and sometimes from the OD. This can be annoying when trying to buy v bands as I found out with my last setup. Sorry for the off camera shot and confusion!

The exhaust housing flange ID is 3” and OD is 3.553”

[taylorrb]

Ive been making over 600whp for over a year now on my rb26 and its been great, pulsar gen2 gtx3582r

[johnny_gtr]

Have a Pulsar G30-770, dual v band on my R34 GTR. Tomei 260 Poncams.
Starts to make boost at 3000, really feel it at 3400, it's flying by 4000.
Running 250kpa boost, and 513whp.

It's a fantastic street car now

[highwaycultureracingchannel]

not sure if you would get back to me, but i want to know how the pulsar turbo hold up so far? about to order mine very soon and i hope i get some feedback from you thanks

[NikkoCruz]

I’m currently having an issue getting a hold of them to warranty my turbo as it already shredded in 3 days. I need a new one like yesterday and I don’t want to go through taking off the turbine housing and all that as I only need a new chra and compressor housing

[justtrue]

Can i hook it up on 3.6 liter engine at 8 psi boost??

[thragegamer]

would you happen to know if the generic ebay gt35 exhaust housing would work on this turbo?

[jamesmclachlan]

fantastic video. clear and informative

[jamaicawalker]

Would this turbo be good for a 2015 3.7 q50?

[engineguy]

Considering a Pulsar 3076 for an aircooled Porsche 911 engine. Whats the diff between the Gen I and Gen II? Since the car doesn't have a water cooling system, it will be used with oil only for cooling as well as lubrication... any advice appreciated.

[brianburris]

How is this turbo holding up ? I'm looking at the 3584r. Any help for your channel I can see when buying or discount codes for us ? Or have a old one laying around I can buy lol. T3 v ban .

[TeamIPhone]

I'm looking for a new turbo. A friend recommended me to look at pulsar turbos. Just wondering if it's a good turbo to go with. The cost is price is nice, but is it reliable and make power like a garret or precision turbo?

[damianrivera]

any discount code for a pulsar purchase

[simonhill]

Any idea if gtx35 turbine housings would fit on the newer g35 turbos? Really want the divided t4 housing on a g35

[seahorse]

Turbulence...lol, the flow of all gasses in combustion engines is wildly turbulent. I wouldn't worry about bolt holes.

[michaelwarden]

How has this turbo been? Still going strong?

[codyhirschmann]

Is there a pulsar turbo that works on a prescion flange ??

[hseriesonlymonctonnb]

These turbo are the same as the boosted boys run just with a better front housing if your not planning on making 700 whp a gtx3076r gen 2 would be a better option

[pirihern]

I have a 98 honda prelude 5 speed with 223, 000 miles basically stock. I'm 68 retired . Gave to son, but he prefers driving the 2011 leus is250. I drive a 2006 subie sti, but getting tired of it.