How to Install a Thermostatic Mixer Shower | Top Trade Tips

Learn how to fit or replace a thermostatic mixer shower with this simple step-by-step guide. In this video we'll show you how to properly measure up, drill for fittings, and fully install a mixer shower.

0:00 - Introduction
0:22 - Products and Tools Required
1:07 - Fixing the Wall Covers
2:10 - Installing the Thermostatic Valve
3:38 - Measurements for Sliding Rail
6:20 - Fitting the Sliding Rail
7:44 - Attaching the Shower Head
8:28 - Mixer Shower Reveal and Outro

Thinking about doing some interior design? Wanting to transform rooms in your house? Or maybe you're just looking for new home decor ideas and cost effective designs? If you'd like to see more 'how to' videos like this one, subscribe to our YouTube channel and ring the bell for notifications to get updates on our latest DIY tips!

And don't forget to follow us on all of our other social media handles...

#diy #MixerShower #TilingTradeTips

[Dee-ehtt]

Very informative video. Thank you so much 🙏🏻

[thomascoyne]

Was fitting a mira shower on Sunday made a mistake trying to upgrade the fixing on the wall of the Mary shower that holds a copper pipe in place only had one screw hole per pipe so I bought a set from Amazon with Ford screw holes similar to the ones that you put on there but when I connected the base of the shower unit the pool was I want to dip towards the wall for the showerhead so I had to undo it all and put the mirror shower bits on his tender moments taken them Olive’s off but got there in the end.
Great volg 👍👍👍👍

[zallone]

Hi craig,
Will be replacing mixer shower soon, you're video has been very helpful . Thank you .

[stephenblair]

Aww man this is great, makes the job simple. I struggel with the placement of the upper shower support. surely this should be flipped 180 degrees so the allen key is mostly hidden, facing up and into the corner.

[leoswan]

Can you do a video of installing the water pipes into the wall up to the point of where this video starts, to include the showing fixing plates?

[dianet]

Hi, Our Biggest issue we have.. how do we ensure the accurate position of the drilling holes in the wet wall for the pipes behind it leading from the thermostat bar?🤷‍♀️When using plaster board we had numerous attempts several holes made to get it right …but at £150+a wet wall panel we don’t want any mistakes .. any helpful advice for an easy way to do this please . We plan to put up the wet wall tomorrow eek

[LucidComposureUk]

What do you do about the exposed threads after you’ve tighten up the bar?
Is it normal to leave them showing?

[GuyNewell-ro]

Any idea what brand/type of shower this? I need to replace exactly the same one.

[fistoffurystreetkingz]

How do you turn off the cold water? Usually the hot can be done from the combi boiler

[Dovestonedipper]

Did you get get the hot and cold feed the wrong way round at 1:30 ?

[JamesNeil-hx]

Hi Craig,

I’m installing a very similar fixture. The issue I’m having is I get either very hot or very cold water. I have since discovered that the original plumber installation has the hot and cold pipes in the wall reversed. For this fixture I should have hot on the left and cold on the right, but the pipes in the wall are not that orientation. Any help would be appreciated. Do I need to rectify the pipe issue behind the wall to match what the fixture is indicating?

Thanks

[justinjenkins]

What’s the names of the plates that you’re attaching the mixer to?

[zeezee]

should the shower bar tight?

my currently moves but there are no leaks, does it need tightening up?

Thanks in advance

[hamid.yusefzai]

I have issue with shower thermostatice how do turn off the constant water temperature its on 38 but if i change it to 25 or less the water stops. Any help would be appreciated