Makita GA4530R Angle Grinder | Unboxing and Setting Up

In this video I show the unboxing and the setting up the Makita angle grinder GA4530R including installing of the grinding wheel.
115mm or 4 inch wheel diameter with maximum wheel thickness of 7.2mm. Rated speed of 11,000 rpm with no load. Weight 1.8kg. The tools is intended for grinding, sanding and cutting of metal and stone materials without the use of water.
#makita #tools #anglegrinder
Note: Always wear appropriate eye and hearing protection. Always read the instruction manual before setting up and using the equipment. Have fire extinguishing equipment ready to hand.

[richardharrold]

Thank you, John. This was very helpful. I also read your replies to some of the other comments here which were also very helpful. Great use of YouTube for a functional, well put together tutorial in what I anticipate will be one of the more well used tools in my shop.

[DiggingwithDallas]

Did an abrasive wheel course at my very first job the course was 1/2 day. On the way back the works van decided to break down on this. 1/2 course ended up go on forever brake down to a garage hat to wait for the boss to bring 2 cars to get us all back. Managed to get over time as well!! Win win

[mirtaxiomelyssandin]

Thank you very much! Very helpful and easy to follow up. God bless you🙏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾☺️👌🏾👍🏽

[dexall]

Thank you so much for sharing this video. It’s my first time using an angle grinder so this really helped me. 🌟

[zimbaliretreats]

Thank you- video was perfect👍 ❤️ from Jamaica🇯🇲

[MrRobertojg]

Hi, Good short video and introduction to the product. Just one, but I think important point to make. In the video you say that the supplied disc is a 'Cutting' disc for metal. As far as I am aware the actual disc shown is a 'Grinding' disc for metal. This is an import distinction as using a Grinding disc for cutting and using a cutting disc for grinding is potentially very dangerous. In the interests of safety I just thought I would raise the issue.

[notdyingsober]

If it doesnt come in a case it means its a throwaway tool

[patscanlan]

When using with a wire wheel cup brush do you remove the flange?? TY!

[danielbonner]

The makita 4 inch is my favorite of all time and I have had about 10 different grinders. The smaller body feels great in your hand and they are tough and reliable. Replace the brushes and switch and theyll keep going.

[kathykeane]

Hello John. I want to use a steel cutting disc (which was sold with the unit) but it won't secure - not as thick or shaped as the grinding disc. The instruction manual is useless. Thanks in advance. Catherine

[eddyhmmk]

Kinda sucks how the guard doesn’t have a quick adjust. But this thing is a beast, compared to my cordless.

[Samboy]

Thanks this helped me a lot as I couldn’t get the guard on lol
But isn’t that disc a polishing disk not a metal cutting disc. It’s way too thick

[bikemancambs]

first time useing this today, the switch isnt good and the handle is very cheap , sound is ok and cutting is fine

[AT_PokemonTCG]

Just bought one need to cut subway tile for by backsplash. Does anyone know if this tool can cut tiles if I buy the right blade or can I use the diamond blade if it comes with??

[poohpot]

Thanks so much for this. Very useful 👍

[harrytimko]

Good video.. can I use a Ridgid multi grinding diamond wheel with a Makita grinder? I ask because there is no room on the driveshaft for the inner flange nor the locking nut with the Ridgid grinding wheel.

[cliffcarlo]

Only design fault is the on-off switch. Dust can accumulate behind it after a while making the unit difficult sometimes to switch and stay on.

[TheSr]

Thanks for the video.
I'm looking for a 9565crv or this one.
The former has sjs I and this sjs II. Does it make any difference?

[josivasam]

Do you know where to purchase the 4 inch cup wheel?

[naspiasaronay]

Can I use this machine for wood? I hope you can make a video for this.