filmov
tv
3 pie crust decorations: your dessert will be so special

Показать описание
Ingredients
1. 3 Pastry Pie Tops
2. A square plate
3. A knife
4. A puzzle piece
5. A clothes pin
6. Scissors
Instructions
1st Pie Design - Diagonal Cuts
1. Cut a pastry pie top in half and place in front of you, round side up
2. Diagonal Cuts
a. Use a square plate corner as a mold and use a knife to make 7 cuts into the pie top. Do not cut all the way to the bottom of the topper in these cuts.
b. Start at the top of the pie top, make the cut, lower the plate, make the cut again, and repeat until you have 7 of these cuts
3. Place the design on top of a pie, and turn over every cut you made to the other side of the pie.
4. Cut off any extra pie top around the pie with some scissors
2nd Pie Design - Clothes Pin
1. Lay the full pie top in front of you
2. Stick the tip of the clothespin into the pie, then rotate it 180 degrees and repeat.
a. Start at the top of the pie top of the pie and go horizontally
3. Repeat this step until pie top is fully covered with these markings
4. Place the design on top of a pie
5. Cut off any extra pie top around the pie with some scissors
1. 3 Pastry Pie Tops
2. A square plate
3. A knife
4. A puzzle piece
5. A clothes pin
6. Scissors
Instructions
1st Pie Design - Diagonal Cuts
1. Cut a pastry pie top in half and place in front of you, round side up
2. Diagonal Cuts
a. Use a square plate corner as a mold and use a knife to make 7 cuts into the pie top. Do not cut all the way to the bottom of the topper in these cuts.
b. Start at the top of the pie top, make the cut, lower the plate, make the cut again, and repeat until you have 7 of these cuts
3. Place the design on top of a pie, and turn over every cut you made to the other side of the pie.
4. Cut off any extra pie top around the pie with some scissors
2nd Pie Design - Clothes Pin
1. Lay the full pie top in front of you
2. Stick the tip of the clothespin into the pie, then rotate it 180 degrees and repeat.
a. Start at the top of the pie top of the pie and go horizontally
3. Repeat this step until pie top is fully covered with these markings
4. Place the design on top of a pie
5. Cut off any extra pie top around the pie with some scissors