DO NOT buy a LASER ENGRAVER until you see this video - CREALITY FALCON 40W #laser

*CLICK THE EXCLUSIVE LINKS to purchase the CREALITY FALCON 40W LASER:*
Don't forget to use *DISCOUNT CODE: FN40PPR*
#CrealityFalcon2 #CrealityLaserEngraver #40WFalcon2 #laser

The CREALITY FALCON 40W LASER ENGRAVER is really something to see! We made several projects with it and pushed it to the max by trying to cut 3/4" wood in ONE PASS! Is it possible?! Watch and find out!

& use DISCOUNT CODE *22wfalcon2* for *15% off!*

(PLEASE NOTE: The honeycomb grill, stainless steel consumables, roller and protective cover are SOLD SEPARATELY.)

*TO SEE MORE OF OUR CONTAINER HOUSE BUILD, CHECK OUT THIS PLAYLIST:*
This playlist starts from the very beginning of our project!

*Don't forget to check out our website and store:*
We have PDF plans of details of our container house and all proceeds help support the channel!

*SOCIAL MEDIA PAGES:*

*Buy us a coffee to support the channel!*

#laserengraving #laserengravingmachine #lasercuttingmachine #lasercutting #lasercutter #lasermarkingmachine #engraving #craft #crafts #diycrafts #diyhome #custommade #custom #build #building #creative #pacificpinesranch #tools #gadgets #howto #laser #custom #art #artist #artwork #giveaway #craftideas

[genegoodwin]

Here is a word of warning. ALWAYS wear a mask when routing, sanding, or anything with wood. I did woodworking as a hobby throughout the years and now I have pulmonary fibrosis. My lungs are dying quicker than the rest of me. I have seen this before when I worked at a nuring home. It is a miserable slow death..

[timk]

Always finish and seal your backside of signs for the ultimate longevity...just a tip from a life long carpenter...keep up the great work

[empirefilmsuk]

Great video! Just got mine and been using it a ton. Quick question thought, how do you turn on precise mode? I want to do some fine engraving :) thanks

[teamchiina]

Nicely done with the 3/4" sign. I didn't even consider that a 40W diode could cut through that much material. One trick I've used in the past for placing things like the "EST 2018" is to engrave it into the surface of the target (the 3/4" sign in this case) and the engraving creates a small recess that the pieces just slot into so you won't need the laser and quick square.

[stuffinfinland]

19:55 those letters which are cut out could be painted as white and glue them back 50% of the thickness etc?

[saldek]

Does this come with a Co2 laser to cut slate? If it will do slate, What depth will it cut to?

[chrispearl]

Haven’t finished the video yet, but I saw something when you were setting the height of the laser using their included guide. The minute you pulled it out, the wood flexed up. That’s a good thing to consider for any and everyone. Once that happens, it’s just all kinds of wonky. You’ll get perfect results in one place and odd results elsewhere. Wood can play a factor. If it isn’t flat, it’s not gonna be good for your project.

[scottmorris]

Great video. I was wondering if you could put out an update video, with how much use and how well it has held up in the last two months. And of course, issues you had, the pros and cons. Thx.

[DwightStebner]

I do not see where anyone else asked, but what was the speed when cutting the 3/4" wood?
did you focus 1/2 depth of wood?

[benjaminjensen]

Precise mode means it cuts the power to 20w and the laser beam is also thinner (0.2 mm/200microns) whereas the 40 W is thicker and cuts more material (0.4 mm/400 microns)

[nismob]

Great video, what is the best setting for cutting acrylic?

[martingardens]

They're called "stencil" fonts.
I'm going to have to get one of these lasers for my container build. 
Birch-plywood wall interiors with laser-cut holes for flush mount switches and outlets.
This is the solution I was looking for. 
Thanks!

[alexcienfuegos]

What program are you running to use the laser? I am interested in purchasing one myself. And can you scan a drawing and engrave and cut that.

[tooby]

How is it to grave lets say a pistol grip. With variable hights. Can i lay down a object and its feels the layer hights. Leta say its 1cm on one edge and 3 in the midle and maby 2 to the right. Or is it just flat if i dont the roller?

[moddwerxgamingpcs]

When making parts in Acrylic, you can use the edge of the acrylic piece you cut out to aid in taking the tape off the acrylic. It won't scratch the acrylic doing it in this fashion.

[RandomVideos-cs]

Can we able make pcb using this machine ?

[thomasnorthcastle]

Before staining, do you use a pre-stain wood sealer? If not, it’s like using PVA Primer for new drywall. Doing so will even out the wood grain so that the stain is even.

[JarppaGuru]

but will it cut 50% white acrylic. i can engrave 5w laser just fine. no need cut wood. best AD eva but will it cut 50% white acrylic. no body care 30m black

[alessandrooism]

This machine can cut 2 mm carbon steel or aluminum plates?

[neototem]

Do you think this laser would hold up doing production work? Could it run all day?(5hrs duty out of an 8hr day)