How to Shampoo Car Seat Effectively with the Bissell Spot Clean Pro Extractor!

preview_player
Показать описание
How to shampoo a car seat with steamer and extractor from steps 1-4 along with satisfying extracting clips!
How to properly shampoo car seats, auto detailing knowledge.
-
Follow us on both Instagram & TikTok:

Рекомендации по теме
Комментарии
Автор

Bought a used car for my kids that was owned by a heavy smoker. Everything inside was yellow and the car was basically trashed inside. Seats are tan, so the yellowing and dirt were very visible. My daughter and I spent hours doing pretty much what you did, with a Bissell, scrub brush on drill, shampoo, etc. Then i ran ozone machine inside the care for about an hour to rid about 90% of the smell. Then, I put a dehumidifier in the car overnight and was able to extract about a half gallon of the water from the Bissell pro, that got into the seats and carpet. After the next few months, my daughter was still embarrassed about the back seat because there was still a bit of smokers yellowing in the fabric. Today we used the Bissell machine, and removed the back seat pads. It wasn't too hard to get them out I ran them up to the local self service car wash and power washed them with soap and water. Worked great! Looks almost brand new the yellowing just ran off the seats and down the carwash drain. Back home and used the Bissell to remove most of the car wash water that had permiated the seat. Will likely leave it out a couple of days to dry. May even repeat the use of a dehumidifier if needed.

louofm
Автор

Good video and satisfying to watch the extractor do it’s thing lol

Eltamarindo
Автор

so great mate loved the extractions&results keep it up and make more

crazzyskilled
Автор

Great clean is so handy i also use a bit of tide helps and gives it a fresh sence....i also use super clean to remove dry concrete of doors that were caked on worked great and save money no buying a dedicated cement chemical

jrv
Автор

Aye I do the same but I used P&S product to that. For Leather I used LVP 3D it works amazing

kevinalvarez
Автор

Did you put Andy shampoo in the bissell or did you only use it to exact the water in the seats.

alvarezz
Автор

Do you add water to the bissel at all or just the shampoo stuff you spray on the seats and suck it all up

brandonvictor
Автор

Do you have links to the equipment that you used?

Tony-ekpf
Автор

You used super clean in what dilution?

kevinmioto
Автор

Only issue I see is all the water and liquid. It’ll look like the stains are gone, but you
Just water them down. When it dries they usually resurface

Newblood
Автор

What cleaning solution can I add to the extractor tank for carpets and seats?I have a vacmaster extractor, can I put some of the chemical guys fabric and carpet cleaner diluting it with water?

jaysteezy_srt
Автор

I DONT USE SUPER CLEAN ANYMORE 2 MUCH OF A STRONG SMELL & ITS NOT GOOD 2 BE INHALING IT IN I USE CHEMICAL GUYS CITRIS CLEAN & 4 THE TOUGH STAINS I USE ASWOME.

lilartab
Автор

I’m sorry but this car is still dirty after your detail..you can clearly see brown spots on the carpet and the seats are stained in some areas..also it seems the plastic isn’t clean in certain places.Now please don’t take offense to this message..nobody can grow and learn if we don’t say and reflect with honesty. I do however love the way you used the steamer to breakup the dirt and sanitize at the same time 🙂

yvonnehornung