RUTX11 Industrial Cellular Router Quick Start Guide | Teltonika Networks

Need some help setting up your Teltonika Networks RUTX11 industrial cellular router? Watch our quick start guide video and follow the step by step instructions to easily set up your new router for operation.




Timestamps:
0:00 Introduction
0:07 RUTX11 Router box contents
0:56 How to insert SIM cards into RUTX11 Router
1:16 Setting up the RUTX11 Router
2:03 How to login and set-up RUTX11 Router

CONNECT WITH US:

#QSG #industrial #RUTX11

[TeltonikaNetworks]

Timestamps:
0:00 Introduction
0:07 RUTX11 Router box contents
0:56 How to insert SIM cards into RUTX11 Router
1:16 Setting up the RUTX11 Router
2:03 How to login and set-up RUTX11 Router

[korileviosa]

Hey great product! I am installing the RUTX11 inside a shipping container to provide internet to a solar inverter, is the gnss antenna the one I need outside the container to receive signal and is it IP rated? Thanks!

[GedandMichele]

Hi. None of my pc's have an ethernet cable. Is there a work around?

[Julian-nlvv]

Does it have 2 modems or just 1? In case of a failure on one SIM/network, how much time it takes to switchover to the other SIM/network? Thank you.

[Djdaithik]

Hi, whats the best way to set up the RUTx11 from the main router. So I'm taking in an ethernet connection from my main router and then on to my TP link 1060 switch. when i plug the ethernet into the wan port i don't get any internet supply. do I have to configure it in a different mode?

[maxmulax]

so, say, if you are doing a live stream, and 1 sim internet goes low, it will switch to the 2nd one without losing signal? or it will stop then switch? also what would be the equivalent parameter to a minimum of 2mb/s upload? thanks!

[davidfulop]

Do the two cards work at the same time? Does the internet speed add up from 2 cards or does only one work?

[jokubasvenckus]

hi.when i type in the IP it doesnt open anything and gives an error can you help please?

[lifeboy]

Can any of the LAN port can be configured for VoIP service?

[funtimeonline]

Is there instructions for setting TTL?