1 Point Hitch and Implements

Over the years I have collected and made several implements for my GT6000. This is a walk around with a few simple demonstrations.
WARN 69373 Winch Roller Fairlead
MotoAlliance Impact Implements Pro 1-Point Lift System for ATV/UTV with 2 inch Receivers
Brinly BS-38BH Sleeve Hitch Tow Behind Box Scraper, 38-Inch
MotoAlliance Impact Implements Pro Cultivator for ATV/UTV with 2 inch Receivers
MotoAlliance Impact Implements Pro 3-Position Blade w/Box Ends for ATV/UTV with 2" Receivers
CURT 45006 Bolt-On 2-Inch ATV, UTV Trailer Hitch Receiver Adapter
Reese Towpower 81378 Class II Step Bumper Receiver Hitch, Black

[raylebonville]

Wow! Just what I was looking for. I was starting to seriously regret buying my 1 point wheelhorse. Now I can buy / create implements to do more than just cut grass and push gravel and loose dirt. TYVM

[joalin]

Thx, buddy! You just gave me solutions and inspiration to build stuff to my lawnmover. I absolutely ❤️ this! Joa in Sweden.

[MrMaddparkison]

Dude i just finally found the correct size drive belt for my gt6000. An now im looking for what all attachments went for these little beasts. After seeing this i might just make what i need. Awesome demonstration. Thanks man

[championplayerdo]

I was actually most impressed with the unit you built out of a hot water tank. You remind me a lot of myself 👍👍

[JasonPrashaw]

Thats is one awesome set up there really like the old craftsman garden tractor realy nice

[Rusty_Nickle]

If you weld a 6-in bar on top of your latch going straight up and then tie the rope to the top of it that'll give you a more leverage and save you on ropes. Probably make it easier to open too. At any rate awesome setup. I wouldn't mind having something like that around

[TrehanCreekOutdoors]

Awesome creativity. Thanks for this helpful implement review.

[larryfinch]

Just bought my 1995 Gt6000 18hp Kohler w 6 spd hi/low in good cond for 100 bucks! ! I was worried because its missing the bottom triangle of the sleeve hitch. However you solved my problem! Thank You!!!!

[claudecoleman]

You have taught me so much today thank you 🙏🏾

[philliphall]

Really great ideal’s and work well to
Keep thinking 🤔

[timothywilliams]

Instead of a hand crank I'd put an electric motor on it.
Probably something like a windshield wiper motor. They are 12v with gear reduction and usually variable speed. Should be easy enough to mount then add sprockets and chain.

[spencerrodgers]

I’m just curious on where you got the plows

[thomascooper]

Love your stuff !! Just found you and instantly subscribed.
Did you say your GT6000 has a Roper transaxle ? I just watched your tug of war video and you said it had a Peerless 633. Did you swap out at some point ? Did you do a video ?

[TylerHankss]

Do you find that those chains help your turf tires grip? I’m debating on ordering chains for mine. Thanks!

[AUTISTICBLOGGER_steven]

Would you consider that a tractor and not a lawn mower

[DannyAllen]

What part of Maine do you live in? I lived in Newport just off of rt7 good job putting your stuff together!

[josephpacheco]

Time to modify that rear winch and 1pt hitch. Put a pulley on the crank rod where the handle attaches and move your winch to the top of the 1pt hitch and now you've got remove work on the fly.

[mowerbro]

What would be you suggestions for breaking ground on a old gravel driveway with really compact soil.. almost all gravel is gone
Really over grown
Hasn't had much love in years. Suggestions so I don't waste my money 💰

[freakinowned]

Question I’m doing a winch in my gt6000 to operate my craftsman dozer plow as well do I need to cut my plow like you or can I just not have it continued to implement lever handle linkage

[jwiereng]

1:04 Warn I hear you say Warren