Control servo motor with ultrasonic sensor and arduino

code link

[Nomee_]

at last, I found a good working one, JazakAllah Khair.

[siddharthmanoj]

finnally a clear proper tutorial with link to code given. Thankyou!

[srivatsanshreya]

Thank you soooo much. The code of other videos did not work but in yours it worked!

[melegenD]

Thanku for this video keep working, 👍👍

[GauravSingh-tvbp]

Thanks bro I was struggling to find it thank you so much 🎉🎉

[chrischillbilly]

Question - can a servo motor like this run straight off a 9V battery via Arduino or would this burn the motor immediately if no resistance is used? If resistance is necessary, how much? Thanks!

[PesiSam]

Can you please please tell me what to do so that the sensor detects the object from a further distance? Which line of code should I change? please

[stevhandingwall]

Learning this so I can automate a robot using servo positioning

[nettrikan]

bro... dont we need a battery to power the circuit?? don't we need battery to power the aurdino...
once the program is uploaded in the aurdino, should i take my laptop to school to show it working or else just the aurdino with the circuit. please help...sorry I'm a starter. studying in school. any help will be valuable.. thanks

[GsWorkshop]

Nice work, trying to use it in a project im working on now, which part of the code would I change to change, The speed and how for the motor spins

[syamirulizam]

what if i use different type of servo motor? MG995 360 Degree rotation. Is the code is the same or i need to change a bit?

[reflex_]

Arduino: 1.8.9 Hourly Build 2019/01/24 07:33 (Windows 7), Board: "Arduino/Genuino Uno"

Sketch uses 4376 bytes (13%) of program storage space. Maximum is 32256 bytes.
Global variables use 291 bytes (14%) of dynamic memory, leaving 1757 bytes for local variables. Maximum is 2048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x5f
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x5f

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.

[dzikrilhakeem]

hi im just want to ask you...can you show me how to make a simulation using a proteus

[shantanukudav]

I have an SG90 servo motor, and it doesn't work with the code you provided. What change have i gotta do?

[krizzy]

can you make a code and circuit diagram for inductive proximity sensor controlling a servo motor?

[suvranamathapati]

Bhai using ultrasonic control the +serovo+buzzer+led can you do it

[ardaus_]

i want ti add one more servo motor the same circuit, do i need to add another servo to the same circuit and one more pin do i need to put what pin number ?🙏🙏

[carlamannon]

hi the orange in the yellow cable that is in the breadboard(twice) do we add that and how?

[germanhinojosa]

Can you help i need the motor spin with the sensor, but when I put off my hand the motor stays there and when I put mi hand the motor spins again

[ninaazman]

I have a question.. Will the code be the same if i use arduinodroid?? Or i must use the same software to use the same code???