New MECPOW G5 Chuck Rotary Roller | Engraving round objects #lasercutting #laserengraving

In this video I will review and show you how to operate the latest Mecpow G5 Chuck Rotary Roller.
I will guide you through the process step by step and will do some engraving using this new rotary roller.
At the end of the video I will give you my thoughts about this Chuck Rotary Roller.

If you are interested in this Rotary Roller or other MECPOW products, check out the links here below:

Affiliate links

Mecpow X4 Promotion!

MECPOW X4
439EUR CODE: MECPOWX4
Mecpow x4 + Rotar Roller Claw Disc Rotar Chuck Kit + Laser Bed
619EUR CODE: MECX4RCL
Mecpow X4 22W + FC1 Fireproof Enclosure + Laser Bed + Rotary Roller
599EUR CODE: MECX4FLR
MECPOW X4 PRO
629EUR CODE: MECPOWX4P
Mecpow X4 Pro 22W + Rotary roller + Laser Bed
729EUR CODE: MEC4PRL
Mecpow X4 Pro 22W + Rotary roller + Chuck + Laser Bed
799EUR CODE: MEC4PRCL

Official LightBurn G-Code License, 1 Year Validity

MECPOW G5 Chuck Rotary Roller
79.99EUR CODE: MECPG5
MECPOW X5 / X5 Pro / X4 / X4 Pro Original Lenses (4pcs)
MECPOW X3 5W
129EUR CODE: MEWPOW5
MECPOW X3 Pro
199.99EUR CODE: MECPOW10
MECPOW X5 22W
449EUR CODE: 8CXQTLQD
MECPOW X5 Pro 33W
599EUR CODE: 8CXQXKY2D3
MECPOW G3 rotary roller
59EUR CODE: MECPG1
MECPOW G3 Pro rotary roller with additional support
64eur code : MECG3P
I hope you enjoyed this video and I will see you in the next one!

00:00 - Intro
00:21 - What's in the kit?
02:52 - How to operate the chuck
06:14 - Explaining difference between X3 and X5
07:08 - How to connect rotary to the laser engraver
12:40 - Adding the feet to raise the laser engraver
15:23 - Adjust settings in LightBurn
16:51 - Configure and calibrate the rotary roller
19:35 - Fine-tuning the mm/per rotation
25:23 - Create a test pattern
33:44 - Adjusting the line interval
36:35 - Engraving the first design
38:23 - Results of the first engrave
39:48 - How to engrave a circular object
40:14 - Engraving the second (circular) design
41:48 - Results of the second engrave
42:19 - How to clamp a ball or a ring for engraving
43:01 - Final conclusion

[NShellhopper]

You know, my light didn't work and I couldn't figure out why. You said, push the button to turn on the light. I have had the machine for two days and never noticed it. I went in and pushed it..and the light still didn't come on.

Wiggling and jiggling the connection finally got it working.

Thanks for making a thorough video. I have watched other videos, they talked about the light, none mentioned the switch.

Since I have learned how to change the default wifi password ($52=newpass in lightburn console, then restart) i have solved all the showstopper issues. I am goind to print a plastic magnet holder so that I can frame with the door open. Not allowing framing with the door open is dumb. Certainly the laser should be interlocked with the door. There is no reason to interlock movement.

[MrDiablios]

Hello ! Thanks for the video
Would you recommand the G3, the G3 PRO or the G5 ? Which one seems the best to you ?
Thanks